Part Description: 2009 Chevrolet Colorado Filler Neck
More Info
Vehicle Fitment
2009 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
FAQ for Fuel Tank Filler Neck Repair
Q: What is the fuel tank filler pipe housing installation procedure?
A:
Install the screws to the fuel filler pocket and tighten it to 10 Nm. Next, install the fuel filler hose and install the fuel cap.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the fuel injector removal procedure?
A:
First, remove the fuel rail, remove the Fuel Injector retainer clip, and the fuel injector. Finally, remove the fuel injector O-ring seals.
Q: What is the fuel level sensor removal procedure?
A:
Remove the fuel tank module and disconnect the Fuel Level Sensor electrical connector from the module cover. Disengage the locking tabs on the sensor and slide the sensor upward from the bucket.
Q: What is the fuel tank pressure sensor removal procedure?
A:
Lower the fuel tank, remove the left rear pickup box wheelhouse liner and disconnect the chassis wiring harness electrical connector from the Fuel Tank Pressure Sensor. Pull upward to remove the sensor from the fuel tank module.