Part Description: 2009 Chevrolet Colorado Manifold
More Info
Vehicle Fitment
2009 Chevrolet Colorado | LT | 8 Cyl 5.3 L GAS
FAQ for Exhaust Manifold Repair
Q: What is the exhaust manifold installation procedure?
A:
First, install the exhaust manifold bolt to the exhaust manifold and place a new gasket onto the bolt. Install the retaining exhaust manifold bolts, exhaust manifold heat shield, ignition coil bracket to the valve rocker arm cover, and the spark plugs. Next, install the upper intake manifold sight shield, and the catalytic converter to the exhaust manifold nuts and tighten to 50 Nm.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the exhaust muffler installation procedure?
A:
Install the front exhaust Muffler pipe to the front exhaust insulator, install the catalytic converter nuts and tighten to 45 Nm. Next, tighten the exhaust muffler clamp at the catalytic converter and tighten it to 43 Nm. Install the right rear leaf spring bolt/nut and tighten to 85 Nm. Finally, install the lower shock absorber bolts/nuts and tighten them to 95 Nm.
Q: What is the exhaust system insulator installation procedure?
A:
First apply a soapy solution to the frame support bracket rod, the inner diameter, and the Exhaust Pipe hanger rod. Next press the exhaust pipe hanger over the frame support bracket rod and the exhaust pipe hanger rod.
Q: What is the catalytic converter heat shield removal procedure?
A:
Remove the 5 nuts securing the heat shield to the floor panel and the catalytic converter heat shield from the floor panel.