< Back ×
My Vehicle Change Vehicle
2009 Chevrolet Colorado
< Back to View All
Driveline, Axles & 4WD
- Department
- Brands
- Prices
Dorman® OE Solutions Driveshaft Center Support Bearing for 2009 Chevrolet Colorado
PartNumber: 934-626Product Specifications- Bracket Material: Steel
- Inside Diameter: 30 mm
- Installation Hardware Included: No
- Installation Instructions Included: No
- Mounting Bracket Included: Yes
- Mounting Hole Quantity: 2
- OE Part Number: 89040334
- Support Bearing Type: Housing Mounted Bearing
- UPC: 037495242790
- Part Description: 2009 Chevrolet Colorado OE Solutions Driveshaft Center Support Bearing
Vehicle Fitment- 2009 Chevrolet Colorado | All Trims | All Engines
$64.37
Anchor® Driveshaft Center Support Bearing for 2009 Chevrolet Colorado
PartNumber: 6068Product Specifications- Notes: BEARING ID / BORE: 1.1811 INCH / 30 MM;CENTERLINE: 4.00 INCH / 102 MM;MOUNT WIDTH: 3.75 INCH / 95 MM;STYLE: ROUND FRAME;w/ELEVATED MOUNTING PLATFORM;
- Inside Diameter: 1.181"
- OE Part Number: 89040334
- Shape: Round
- UPC: 081106060686
- Part Description: 2009 Chevrolet Colorado Driveshaft Center Support Bearing
Vehicle Fitment- 2009 Chevrolet Colorado | All Trims | 4 Cyl 2.9L
- 2009 Chevrolet Colorado | All Trims | 5 Cyl 3.7L
- 2009 Chevrolet Colorado | All Trims | 8 Cyl 5.3L
$28.07
SKF® Driveshaft Center Support Bearing for 2009 Chevrolet Colorado
PartNumber: HB1595-10Product Specifications- Notes: Bearing & Support; w/o 8mm Ctr. Supp. Brg. Shim:
- Bolt Hole Center: 3.740"
- Inside Diameter: 1.181"
- Outside Diameter: 4.448"
- UPC: 085311522274
- Width: 2.165"
- Part Description: 2009 Chevrolet Colorado Driveshaft Center Support Bearing
Vehicle Fitment- 2009 Chevrolet Colorado | All Trims | All Engines
$45.76
National® Driveshaft Center Support Bearing for 2009 Chevrolet Colorado
PartNumber: 207Product Specifications- Notes: w/Isuzu T150 Transfer Case; 2Spd; w/Part Time 4WD
- Bore (Inch): 1.378
- Bore (mm): 35.00
- Design: Single Row Radial
- Inner Race Bore (Inch): 1.378
- Inner Race Bore (mm): 35.00
- Inner Race Radius (Inch): 0.040
- Inner Race Radius (mm): 1.020
- Inner Race Width (Inch): 0.669
- Inner Race Width (mm): 17.00
- Outer Race Outside Diameter (Inch): 2.835
- Outer Race Outside Diameter (mm): 72.00
- Outer Race Radius (Inch): 0.040
- Outer Race Radius (mm): 1.020
- Outer Race Width (Inch): 0.669
- Outer Race Width (mm): 17.00
- Outside Diameter (Inch): 2.835
- Outside Diameter (mm): 72.00
- Series: 200
- Type: A-1
- Width (Inch): 0.669
- Width (mm): 17.00
- Part Description: 2009 Chevrolet Colorado Driveshaft Center Support Bearing
Vehicle Fitment- 2009 Chevrolet Colorado | All Trims | All Engines
$21.32
OEM (Genuine) 2009 Chevrolet Colorado Bearing Asm, Propeller Shaft Center Support
PartNumber: 89040334
Product Specifications- Notes: Canyon, Colorado
- Other Names: Center Bearing, Center Support
- Item Dimensions: 9.3 x 8.4 x 3.4 inches
- Item Weight: 2.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Chevrolet Colorado Bearing Asm, Propeller Shaft Center Support
Vehicle Fitment- 2009 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
FAQ for Driveshaft Center Support Bearing Repair
Q: What is the propeller shaft center support bearing installation procedure?
A:
First position the center bearing on the propeller shaft. Next, install the J 37372 on the propeller shaft, install the center bearing on the propeller shaft and install the washer. Install the retaining nut and tighten it to 167 Nm. After that, install the U-joint to the yoke and the propeller shaft in the vehicle.
By Bob
GM Specialist
01/11/2022