FAQ for Door Hinge Repair
Q: What is the rear-side access door hinge installation procedure?
A:
First, install the bolts retaining the hinge to the body and tighten to 25 Nm. Next, install the bolts retaining the hinge to the door and tighten to 25 Nm.
By BobGM Specialist
01/11/2022 Q: What is the front-side door hinge installation procedure?
A:
First, install the bolts retaining the body side door hinge to the body and tighten to 27 Nm. Next, install the bolts retaining the front door hinge keeper and tighten to 25 Nm. Finally, install the bolt retaining the front door check link to the body, and tighten it to 25 Nm.
By BobGM Specialist
01/11/2022 Q: What is the rear side door hinge installation procedure?
A:
First, install the bolts retaining the body side door hinge to the body and tighten to 25 Nm. Next, install the bolts retaining the rear door hinge keeper straps and tighten them to 25 Nm. Finally, install the bolt retaining the rear door check link and tighten it to 25 Nm as well.
By BobGM Specialist
01/11/2022 Q: What is the door striker service procedure?
A:
First, install the door striker to the body. Next, align the lock striker to the alignment marks, install the door striker screws to the body, and tighten to 25 Nm. Finally, adjust the lock striker.
By BobGM Specialist
29/10/2022 Q: What is the door lock striker adjustment procedure?
A:
Make sure the door is properly aligned with the door opening and close the door onto the striker. Next, mark the position of the door striker with a grease pencil and loosen the screws retaining the door striker to the body. Next, tighten the screws retaining the door striker to 25 Nm.
By BobGM Specialist
29/10/2022 Q: What is the rear side door latch striker installation procedure?
A:
First, install the upper side access door striker to the body and install the bolts retaining the upper side access door striker. Next, tighten the upper side access door striker bolts to 25 Nm and install the rear side access upper door striker trim cover.
By BobGM Specialist
29/10/2022 Q: What is the side door latch striker installation procedure?
A:
First, install the lower side access door striker to the body and install the bolts retaining the lower side access door striker. Tighten the lower side access door striker bolts to 25 Nm and close the rear side access door.
By BobGM Specialist
29/10/2022 See more FAQs (2)