Part Description: 2009 Chevrolet Colorado Front Cover Seal
More Info
Vehicle Fitment
2009 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
Part Description: 2009 Chevrolet Colorado Rear Main Seal
More Info
Vehicle Fitment
2009 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
Part Description: 2009 Chevrolet Colorado Rear Main Seal Retainer
More Info
Vehicle Fitment
2009 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
FAQ for Crankshaft Seal Repair
Q: What is the crankshaft front oil seal service procedure?
A:
Lubricate the outer edge of the oil seal and the front cover oil seal bore with clean engine oil. Install the crankshaft front oil seal onto the J 41478 guide and install the J 41478 threaded rod into the end of the crankshaft. Finally, install the crankshaft balancer.
By Bob
GM Specialist
29/10/2022
Q: What is the cover with seal housing installation procedure?
A:
Install the J-41479-2A and the new rear housing gasket. Install the rear housing with a seal, real housing-to-engine bolts, and oil pan-to-rear housing bolts.
By Bob
GM Specialist
29/10/2022
FAQ for Other Repair Info
Q: What is the engine oil and oil filter installation procedure?
A:
Install a new Oil Filter and tighten it to 30 Nm. Tighten the oil pan drain plug to 25 Nm. Next, remove the oil drain pan from under the vehicle and inspect for oil leaks. Inspect for oil leaks and install the oil level indicator.
Q: What is the oil filter adapter installation procedure?
A:
Install the Oil Filter Adapter and tighten it to 55 Nm. Next, lubricate the oil filter seal with clean engine oil, install the oil filter and tighten to 30 Nm.
Q: What are the valve rocker arm and push rod installation procedures?
A:
First, install the rocker arm pivot support, the Pushrods, and the rocker/bolts. Next, install the number one cylinder spark plug and the rocker arm cover.