Part Description: 2009 Chevrolet Colorado Coil Spring
More Info
Vehicle Fitment
2009 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
Part Description: 2009 Chevrolet Colorado Front Spring
More Info
Vehicle Fitment
2009 Chevrolet Colorado | LT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
FAQ for Coil Springs Repair
Q: What is the front coil springs installation procedure?
A:
First, assemble the mounting plate to the spring and align the center line of any upper mounting studs. Next, install the mounting plate and spring to the spring compressor. Finally, install the shock absorber/spring assembly.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the steering shaft upper bearing installation procedure?
A:
Install the Steering Shaft upper bearing into the steering column tilt head housing. Next, install the steering column tilt head housing.
Q: What is the wheel cylinder installation procedure?
A:
Install the Wheel Cylinder, and the wheel cylinder bolts and tighten to 18 Nm. Next, connect the brake pipe fitting to the wheel cylinder and tighten it to 19 Nm. Install the rear brake shoes and bleed the wheel cylinder.
Q: What is the power vacuum brake booster installation procedure?
A:
First, install the power vacuum Brake Booster and gasket. Next, install the power vacuum brake booster nuts and tighten them to 20 Nm. Install the brake booster pushrod clevis pin to the pushrod and brake pedal. After that install the brake booster pushrod retainer, the knee bolster, and the master cylinder assembly.