Part Description: 2009 Chevrolet Colorado Run Lamp Bulb
More Info
Vehicle Fitment
2009 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
Part Description: 2009 Chevrolet Colorado Cargo Lamp Bulb
More Info
Vehicle Fitment
2009 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
Part Description: 2009 Chevrolet Colorado Stoplamp Bulb
More Info
Vehicle Fitment
2009 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
$2.72MSRP: $4.89
You Save: $2.17 (45%)
FAQ for Back Up Light Bulbs Repair
Q: What is the backup lamp bulb installation procedure?
A:
First, install the bulbs to the backup lamp sockets and install the backup lamp rotating clockwise until the locking tab is fully seated. Next, install the tail lamp screws to the tail lamps and tighten them to 3 Nm.
By Bob
GM Specialist
28/10/2022
FAQ for Other Repair Info
Q: What is the park/turn signal/side marker lamp bulb installation procedure?
A:
First, secure the bulb into the bulb sockets and the lamp assembly. Next insert the inside edge of the lamp tabs into the grille support. Rotate the lamp assembly and push on the outboard edge of the lamp.
Q: What is the front fog lamp bulb service procedure?
A:
Remove the LF or RF wheelhouse liner and disconnect the harness from the bulb socket. Next rotate the bulb socket counter-clockwise and remove it from the projector housing.
Q: What is the headlamp bulb installation procedure?
A:
Install the bolts that retain the headlamp and tighten the bolts to 10 Nm. Next, install the front grille.