2009 Chevrolet Aveo Sway Bar Link

Begin with removing the Shock Absorber-to-body bolts, raise the vehicle, and remove the lower shock absorber-to-axle bolt. Finally, remove the shock absorber.

Enlist the help of another technician to lift the front bumper, raising the vehicle as high as possible. Slowly release the bumper, allowing the vehicle to assume its normal trim height. Measure the distance from the street level to the center of the bumper. Push down on the bumper, release slowly, and allow the vehicle to assume its normal trim height. Measure the distance from the street level to the center of the bumper. The difference between the 2 measurements should be less than 12.7 mm (0.5 in). If the difference exceeds this limit, inspect the control arms, the struts, and the Ball Joints for damage or wear.

You can install the steering pump bracket by installing the mounting bracket and the Power Steering Pump.