< Back ×
My Vehicle Change Vehicle
2009 Chevrolet Aveo
< Back to View All
Crankshafts, Pistons, Rings & Connecting Rods
- Department
- Prices
OEM (Genuine) 2009 Chevrolet Aveo Piston Ring Set
PartNumber: 93744928
Product Specifications- Notes: Aveo, Aveo5
- Other Names: Piston Ring Set, Piston Rings
- Item Dimensions: 3.5 x 3.5 x 0.8 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Chevrolet Aveo Piston Ring Set
Vehicle Fitment- 2009 Chevrolet Aveo | LS, LT | 4 Cyl 1.6 L GAS
$72.86 MSRP:$115.70You Save: $42.84 (38%)
FAQ for Piston Ring Repair
Q: What is the recommended torque or the connecting rod cap bolts?
A:
The recommended torque is 35+45° +15° Nm (25.8+45° +15° lb. ft.).
By Omar
GM Specialist
13/12/2021Q: What special tools are needed when servicing this part?
A:
Piston pin remover/installer set, an angle meter, and an angular torque gauge.
By Bob
GM Specialist
12/12/2021Q: Which manifold will need to be removed?
A:
You will need to remove the exhaust manifold and the intake manifold.
By Bob
GM Specialist
20/11/2021Q: How many bolts attaching the camshaft rear cover are there?
A:
4 Bolts.
By Bob
GM Specialist
31/10/2021Q: How many bolts attach to the cylinder head cover?
A:
There are 9 bolts attaching the cylinder head cover.
By Bob
GM Specialist
31/10/2021Q: What if the piston ring is too thick?
A:
If the piston ring is too thick, try another piston ring. If no piston ring can be found that fits specifications, the piston ring may be ground to size with emery paper placed on a sheet of glass.
By Omar
GM Specialist
29/10/2021Q: What is the recommended torque for the oil suction pipe bolts?
A:
The recommended torque is 10 Nm (89 lb. in).
By Bob
GM Specialist
26/10/2021Q: What is the recommended torque for the connecting rod bearing cap bolts?
A:
The recommended torque is 25 Nm (18 lb. ft.) then tighten the bolts one turn of 30 degrees plus one turn of 15 degrees.
By Bob
GM Specialist
26/10/2021Q: What is the recommended torque for the cylinder head bolts?
A:
The recommended torque is 25+90° +90° +90° +45° Nm (18.4+90° +90° +90° +45° lb. ft.).
By Omar
GM Specialist
26/10/2021See more FAQs (4)