Part Description: 2009 Chevrolet Aveo Oxygen Sensor
More Info
Vehicle Fitment
2009 Chevrolet Aveo | All Trims | 4 Cyl 1.6L
$58.71
FAQ for Oxygen Sensor Repair
Q: What will need to be disconnected?
A:
The negative battery cable and the HO2SI connector.
By Omar
GM Specialist
13/12/2021
Q: Can the heated oxygen wires be soldered?
A:
No, Do not solder heated oxygen sensor wires. Soldering the wires will result in the loss of the air reference to the sensor.
By Bob
GM Specialist
02/11/2021
Q: What is the recommended torque for the heated oxygen sensor?
A:
The recommended torque is 42 Nm (31 lb. ft.).
By Bob
GM Specialist
26/10/2021
Q: What is the recommended torque for the HO2SI connector?
A:
The recommended torque is 40 Nm (29.5 lb. ft.).
By Omar
GM Specialist
26/10/2021
FAQ for Other Repair Info
Q: What PSI should the fuel injector exceed?
A:
The Fuel Injector PSI should not exceed 20 kPa (3 psi).
Q: What tools can eliminate drive belt noise?
A:
The laser alignment tool can help with the alignment of the Drive Belt which may reduce the issue of noise coming from the drive belt.
Q: What will need to be disconnected?
A:
You will need to disconnect the breather tube from the valve cover, the Camshaft position sensor connector, and the ignition wires from the spark plugs.