< Back ×
My Vehicle Change Vehicle
2009 Chevrolet Aveo
< Back to View All
Brake Lines & Hoses
- Department
- Prices
OEM (Genuine) 2009 Chevrolet Aveo Brake Hose
PartNumber: 96534545
Product Specifications- Location: Driver Side; Passenger Side
- Other Names: Brake Hose, Flex Hose
- Item Dimensions: 15.3 x 1.0 x 1.1 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Chevrolet Aveo Brake Hose
Vehicle Fitment- 2009 Chevrolet Aveo | Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS
$35.44 MSRP:$66.89You Save: $31.45 (48%)
OEM (Genuine) 2009 Chevrolet Aveo Brake Hose
PartNumber: 96407749
Product Specifications- Location: Driver Side; Passenger Side
- Other Names: Brake Hose, Flex Hose
- Item Dimensions: 9.4 x 1.1 x 1.0 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Chevrolet Aveo Brake Hose
Vehicle Fitment- 2009 Chevrolet Aveo | Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS
$24.58 MSRP:$46.40You Save: $21.82 (48%)
OEM (Genuine) 2009 Chevrolet Aveo Flex Hose
PartNumber: 96339737
Product Specifications- Other Names: Flex Hose
- Item Dimensions: 9.5 x 1.4 x 0.7 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 25195957
- Part Description: 2009 Chevrolet Aveo Flex Hose
Vehicle Fitment- 2009 Chevrolet Aveo | Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS
$6.57 MSRP:$10.42You Save: $3.85 (37%)OEM (Genuine) 2009 Chevrolet Aveo Pipe Asm, Clutch Actuator Cyl
PartNumber: 96339739
Product Specifications- Notes: Aveo, Aveo5; Master Cyl To Slave Cyl
- Other Names: Flex Hose
- Item Dimensions: 48.7 x 2.8 x 1.4 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Chevrolet Aveo Pipe Asm, Clutch Actuator Cyl
Vehicle Fitment- 2009 Chevrolet Aveo | Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS
$60.12 MSRP:$95.48You Save: $35.36 (38%)
FAQ for Brake Line Repair
Q: What is the front brake hose installation procedure?
A:
First, install the new brake hose to the caliper with new seal rings and the bolt. Make sure to tighten the front brake hose-to-caliper bolt to 40 Nm. Next, connect the brake line to the brake hose, and tighten the brake line to 16 Nm. Finally, lower the vehicle, and check the brake system for leaks.
By Omar
GM Specialist
28/10/2021Q: What is the front brake hose removal procedure?
A:
First, disconnect the brake line from the brake hose support bracket on the wheel housing, remove the E-ring retainer, and remove the brake hose from the wheelhouse bracket. Finally, remove the bolt from the brake caliper, and remove the seal rings and brake hose.
By Bob
GM Specialist
28/10/2021Q: What is the rear brake hose installation procedure?
A:
First, install the brake hoses to the body and the rear axle brackets. Connect the brake lines to the brake hose, and tighten the brake lines to 16 Nm. Finally, install the brake hose retainers.
By Bob
GM Specialist
27/10/2021Q: What is the rear brake hose removal procedure?
A:
First, disconnect the brake lines from the brake hoses at the body and rear axle brackets. Next, remove both brake hose E-ring retainers, and remove the brake hoses from the brackets.
By Omar
GM Specialist
27/10/2021Q: What is the power brake booster vacuum check valve and hose installation procedure?
A:
First, mount the vacuum hose, and install the vacuum hose clips.
By Omar
GM Specialist
27/10/2021Q: What is the power brake booster vacuum check valve and hose removal procedure?
A:
First, pull the hose from the union nut connection, remove the clip on the vacuum hose connection to the brake booster, and remove the vacuum hose.
By Bob
GM Specialist
27/10/2021See more FAQs (1)