FAQ for Seat Heater Pad Repair
Q: What is the driver/passenger seat back ventilation heating/cooling blower procedure?
A:
Use a nylon flat-bladed tool to push the tabs in on the side of the panel to release them from the seat back to remove. Next, drill out the old rivets and install the ones when replacing the blower assembly. Finally, disconnect the electrical connector.
By BobGM Specialist
01/11/2022 Q: What is the rear seat cushion heater service procedure?
A:
First remove the rear seat, the recliner handle, and the outer/inner finish cover. Next, remove the cushion lower trim cover.
By BobGM Specialist
01/11/2022 Q: What is the driver/passenger seat cushion ventilation heating and cooling blower service procedure?
A:
Remove the front seat and pull rearward to disengage the cover from the seat riser. Disconnect the electrical connector.
By BobGM Specialist
01/11/2022 Q: What is the driver/passenger seat back cushion heater service procedure?
A:
Remove the front seat and push the retainer clip downward. Pull outward to release the lever.
By BobGM Specialist
01/11/2022 Q: What is the driver/passenger seat cushion heater service procedure?
A:
Remove the front seat and push the retainer clip downward and outward to release the knob.
By BobGM Specialist
01/11/2022