2009 Chevrolet Avalanche | Black Diamond LS, Black Diamond LT, Black Diamond LTZ, LS, LT, LTZ | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
$50.88MSRP: $76.77
You Save: $25.89 (34%)
FAQ for Door Hinge Repair
Q: What is the rear side door upper hinge and lower hinge service procedure?
A:
First, disable the supplemental inflatable restraint system and tighten the rear side door hinge upper bolts to 25 Nm.
By Bob
GM Specialist
01/11/2022
Q: What is the door striker installation procedure?
A:
First install the striker, the spacer, and the upper striker bolt. Next, remove the lower bolt, rotate the striker, and tighten the striker bolt to 24 Nm.
By Bob
GM Specialist
29/10/2022
Q: What is the door lock striker adjustment procedure?
A:
Make sure the door is properly aligned and close the door onto the striker. Mark around the striker for reference of the original position and move the striker to eliminate drag on the striker and door latch. Tighten the striker-to-body bolts to 27 Nm.
By Bob
GM Specialist
29/10/2022
Q: What is the door striker removal procedure?
A:
First, remove the lower striker bolt and loosen the upper striker bolt. Next, install the lower striker bolt, and remove the upper striker bolt and the spacer. Finally, remove the striker.
By Bob
GM Specialist
29/10/2022
FAQ for Other Repair Info
Q: What is the door lock cylinder service procedure?
A:
First remove the door trim panel, the water deflector, and the outside door handle. Next, remove the clip that attaches the cylinder to the door handle.
Q: What is the rear side outside handle service procedure?
A:
Remove the door trim panel and the water deflector. Make sure to tighten the rear side door outside handle bolts to 9 Nm.
Q: What is the roof rail rear assist handle service procedure?
A:
Pull the assist handle downward to access covers/fasteners and tighten the roof rail rear assist handle screws to 5 Nm.