Notes: Grade: Aftermarket; Description: Seal included; Thread Size: M12 X 1,5; Plug (Connector): 2 Pins
Colour: Black
Height [mm]: 19
Length [mm]: 19
Number of Poles: 2
Packaging Depth [cm]: 3
Packaging height [cm]: 3,3
Packaging width [cm]: 5,8
Spanner Size: 19
Supplementary Article/Supplementary Info: with seal
Thread Size: M12x1,5
Weight [kg]: 0,02962
Width [mm]: 59
Part Description: 2009 Chevrolet Avalanche Engine Coolant Temperature Sensor
More Info
Vehicle Fitment
2009 Chevrolet Avalanche | All Trims | 8 Cyl 6.0L
2009 Chevrolet Avalanche | All Trims | 8 Cyl 5.3L
FAQ for Coolant Temperature Sensors Repair
Q: How do you remove the engine coolant temperature sensor?
A:
You can drain the cooling system, disconnect the electrical connector, and remove the ECT sensor.
By Bob
GM Specialist
01/11/2022
Q: What is the proper way to install the engine coolant temperature sensor?
A:
The proper way is to install the ECT sensor, tighten the sensor to 20 Nm, and refill the cooling.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the radiator grille reinforcement support service procedure?
A:
First, remove the upper Radiator air baffle and deflector. Next, remove the headlamp assembly upper bolts and the hood latch cable. Tighten the radiator grille reinforcement support screws to 9 Nm.
Q: What is the proper way to install the water pump?
A:
The proper way is to install the Water Pump bolts, the drive belt, and the air cleaner outlet duct.
Q: What is the proper way to remove the engine coolant fan motor?
A:
The proper way is to remove the cooling blades, the Cooling Fan Motor bolts, and the cooling fan motor.