< Back ×
My Vehicle Change Vehicle
2009 Chevrolet Avalanche
< Back to View All
Timing Belts, Chains, Cams & Related Parts
- Department
- Prices
OEM (Genuine) 2009 Chevrolet Avalanche Camshaft
PartNumber: 12625436
Product Specifications- Notes: Avalanche; 5.3l
- Other Names: Camshaft
- Item Dimensions: 3.4 x 3.3 x 28.1 inches
- Item Weight: 14.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12593207
- Part Description: 2009 Chevrolet Avalanche Camshaft
Vehicle Fitment- 2009 Chevrolet Avalanche | Black Diamond LS, Black Diamond LT, Black Diamond LTZ, LS, LT, LTZ | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
$394.25 MSRP:$652.53You Save: $258.28 (40%)OEM (Genuine) 2009 Chevrolet Avalanche Camshaft Asm
PartNumber: 12625438
Product Specifications- Notes: Avalanche; 6.0l
- Other Names: Camshaft
- Item Dimensions: 3.4 x 3.3 x 27.8 inches
- Item Weight: 9.80 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12607715
- Part Description: 2009 Chevrolet Avalanche Camshaft Asm
Vehicle Fitment- 2009 Chevrolet Avalanche | LT, LTZ | 8 Cyl 6.0 L GAS
$174.30 MSRP:$288.48You Save: $114.18 (40%)
FAQ for Camshaft Repair
Q: What is the camshaft position actuator magnet installation procedure?
A:
Install a new CMP actuator magnet gasket onto the CMP actuator magnet and the CMP actuator magnet to the front cover. Next, install the CMP actuator magnet bolts and tighten them to 12 Nm. After that connect the engine harness electrical connector to the CMP actuator magnet and install the water pump.
By Bob
GM Specialist
29/10/2022Q: What is the camshaft position actuator installation procedure?
A:
First, compress the timing chain tensioner guide and install EN 46330. Next, install the CMP actuator and timing chain. Install a new CMP actuator solenoid valve and inspect the sprockets for proper alignment. Tighten the CMP actuator solenoid valve and install the oil pump.
By Bob
GM Specialist
29/10/2022Q: What is the camshaft position actuator magnet removal procedure?
A:
First, remove the water pump and disconnect the engine harness electrical connector from the camshaft position actuator magnet. Next, remove the CMP actuator. Bolts and magnet.
By Bob
GM Specialist
29/10/2022Q: What is the camshaft position actuator solenoid valve installation procedure?
A:
Install a new CMP actuator solenoid valve and tighten the CMP actuator solenoid valve to 65 Nm. Next, remove the J 42386-A and install the CMP actuator magnet.
By Bob
GM Specialist
29/10/2022