< Back ×
My Vehicle Change Vehicle
2009 Chevrolet Avalanche
< Back to View All
A/C & Heating
- Department
- Prices
OEM (Genuine) 2009 Chevrolet Avalanche Sensor, Ambient Air Temperature
PartNumber: 15936931
Product Specifications- Notes: Avalanche
- Other Names: Ambient Temperature Sensor, Temperature Sensor
- Item Dimensions: 2.0 x 1.7 x 0.9 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Chevrolet Avalanche Sensor, Ambient Air Temperature
Vehicle Fitment- 2009 Chevrolet Avalanche | Black Diamond LS, Black Diamond LT, Black Diamond LTZ, LS, LT, LTZ | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
$6.01 MSRP:$12.58You Save: $6.57 (53%)
OEM (Genuine) 2009 Chevrolet Avalanche In-Car Sensor
PartNumber: 25885451
Product Specifications- Notes: Avalanche, Escalade Ext; 2nd Design; Upper; Avalanche, Push Pin Style
- Item Dimensions: 2.1 x 1.0 x 1.0 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Chevrolet Avalanche In-Car Sensor
Vehicle Fitment- 2009 Chevrolet Avalanche | Black Diamond LS, Black Diamond LT, Black Diamond LTZ, LS, LT, LTZ | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
$5.52 MSRP:$9.98You Save: $4.46 (45%)
OEM (Genuine) 2009 Chevrolet Avalanche In-Car Temperature Sensor
PartNumber: 12160947
Product Specifications- Notes: Avalanche, Escalade Ext; 1st Design;Avalanche, Escalade Ext; 2nd Design; Lower; Avalanche, Twist Lock Style
- Item Dimensions: 2.1 x 1.0 x 1.1 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Chevrolet Avalanche In-Car Temperature Sensor
Vehicle Fitment- 2009 Chevrolet Avalanche | Black Diamond LS, Black Diamond LT, Black Diamond LTZ, LS, LT, LTZ | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
$7.52 MSRP:$13.62You Save: $6.10 (45%)
FAQ for Air Temperature Sensor Repair
Q: What components does the auxiliary HVAC have?
A:
The auxiliary HVAC has an air temperature sensor, a blower motor, and a mode actuator.
By Bob
GM Specialist
01/11/2022Q: What should you remove before you replace the air temperature sensor?
A:
You should remove the grille from the vehicle.
By Bob
GM Specialist
01/11/2022Q: What is the duct air temperature sensor service procedure?
A:
First, remove the front floor console and the radio front floor console speaker. Next, remove the instrument panel insulator and right side rear air distribution duct. Next disconnect the electrical connector.
By Bob
GM Specialist
01/11/2022Q: What should you remove before replacing the air temperature sensor?
A:
You should remove the I/P from the vehicle.
By Bob
GM Specialist
01/11/2022Q: What is the auxiliary inside air temperature sensor removal procedure?
A:
Remove the third pillar molding, the left rear coat hook, and the rear headliner retainers. Next, disconnect the electrical connector, and remove the sensor grille and the auxiliary inside air temperature sensor from the headliner.
By Bob
GM Specialist
01/11/2022Q: What is the air temperature sensor service procedure?
A:
Remove the top portion of the grill and pull forwards. Next disconnect the ambient air sensor electrical connector.
By Bob
GM Specialist
01/11/2022Q: What is the auxiliary inside air temperature sensor installation procedure?
A:
First, install the new sensor grille to the headliner and install the inside air temperature sensor to the headliner/sensor grille. Connect the electrical connector to the inside air temperature sensor, and install the rear headliner retainers and the left coat hook.
By Bob
GM Specialist
01/11/2022Q: How many screws does the mass airflow sensor have?
A:
The mass airflow sensor has 2 screws in total.
By Bob
GM Specialist
01/11/2022Q: What can you do before you replace the duct air temperature sensor?
A:
You can remove the knee bolster from the vehicle.
By Bob
GM Specialist
01/11/2022Q: What is the air duct temperature sensor service procedure?
A:
First, remove the instrument panel upper trim panel with windshield defroster nozzle grille. Next, remove the inflatable restraint instrument panel module. Disconnect the wiring harness at the sensor and rotate the sensor 1/4 to remove it.
By Bob
GM Specialist
01/11/2022See more FAQs (5)