2009 Cadillac XLR | Base, Platinum, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
FAQ for Hazard Warning Switches Repair
Q: What is the proper way to remove the hazard warning switch?
A:
The proper way is to remove the accessory trim plate and the warning switch and release the retaining tabs.
By Bob
GM Specialist
01/11/2022
Q: What is the installation procedure for the hazard warning switch?
A:
The procedure is to install the hazard warning switch, align the switch, and install the trim plate.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the body control module installation procedure?
A:
Connect the harness connectors to the BCM and position the BCM to the multiuse bracket. Next, install the retaining screws to the BCM and tighten them to 2 Nm. Install the kick-up panel and replace the BCM.
Q: What is the proper way to install the brake pedal position sensor?
A:
The proper way is to install a new sensor, the brake pedal position sensor screw, and calibrate the sensor.