2009 Cadillac XLR | Base, Platinum, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
FAQ for Cigarette Lighters Repair
Q: What is the cigar lighter receptacle or 12-volt accessory power removal procedure?
A:
Remove the auxiliary power outlet fuse and the receptacle.
By Bob
GM Specialist
29/10/2022
Q: What is the installation procedure for the cigar lighter receptacle?
A:
The procedure is to install the retainer, connect the electrical connector, and align the tabs.
By Bob
GM Specialist
29/10/2022
Q: What is the cigar lighter receptable or 12-volt accessory power installation procedure?
A:
First, install the retainer and connect the electrical connector to the receptacle. Next, install the accessory power receptacle fuse.
By Bob
GM Specialist
29/10/2022
Q: What is the proper way to remove the cigar lighter receptacle?
A:
The proper way is to remove the auxiliary power outlet fuse and the receptacle, and then release the lighter socket.
By Bob
GM Specialist
29/10/2022
FAQ for Other Repair Info
Q: How do you remove the starter motor?
A:
You can remove the supercharger, the Starter motor bolts, and the starter motor.
Q: What should you do before you replace the park/turn signal lamp bulb?
A:
You should remove the LF/RF headlamp from the vehicle.
Q: What is the tire pressure indicator sensor installation procedure?
A:
Install the sensor nut and place the sensor body parallel to the inside wheel surface and tighten to 7 Nm. Next, install the tire on the wheel and install the tire/wheel assembly on the vehicle.