Other Names: Clutch Switch, Sensor, Stoplamp Switch
Item Dimensions: 3.7 x 3.3 x 1.8 inches
Item Weight: 0.40 Pounds
Fitment Type: Direct Replacement
Replaces: 89047699
Part Description: 2009 Cadillac XLR Sensor
More Info
Vehicle Fitment
2009 Cadillac XLR | Base, Platinum, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
$12.08MSRP: $19.25
You Save: $7.17 (38%)
FAQ for Brake Light Switches Repair
Q: What is the proper way to install the brake pedal position sensor?
A:
The proper way is to install a new sensor, the brake pedal position sensor screw, and calibrate the sensor.
By Bob
GM Specialist
29/10/2022
Q: How do you remove the brake pedal position sensor?
A:
You can remove the I/P insulator, the screw, and the brake pedal position sensor.
By Bob
GM Specialist
29/10/2022
Q: What is the calibration procedure for the brake pedal position sensor?
A:
The procedure is to install a scan tool, select the BCM menu item, and the BPP sensor calibration.
By Bob
GM Specialist
29/10/2022
FAQ for Other Repair Info
Q: What is the body control module installation procedure?
A:
Connect the harness connectors to the BCM and position the BCM to the multiuse bracket. Next, install the retaining screws to the BCM and tighten them to 2 Nm. Install the kick-up panel and replace the BCM.
Q: What is the proper way to remove the hazard warning switch?
A:
The proper way is to remove the accessory trim plate and the warning switch and release the retaining tabs.