2009 Cadillac SRX Windshield Wiper Arms

You can install the rear wiper blade onto the rear wiper arm, position the rear wiper arm onto the wiper motor, install the rear wiper arm nut, install the rear wiper arm nut cap, remove the tape or the mark from the rear window and inspect the rear wiper system for proper operation.

You can install the wiper blade onto the wiper arm, position the passenger side wiper arm, position the driver side wiper arm, install the wiper arm onto the wiper arm drive spindle, install the nut on the wiper arm, secure the upper hood assist rods onto the assist rod ball studs, install the wiper arm nut covers, close the hood assembly, operate the wipers and wash pattern and verify the driver side wiper does not exceed the wipe area.

The procedure is to mark the position of the rear wiper blade on the rear window with tape or an erasable marker, pivot the rear wiper arm nut cap, remove the rear wiper arm nut, grasp the wiper arm, and remove the rear wiper blade from the rear wiper arm.

The procedure is to set the wipers in the Park position, open the hood assembly, align the driver-side wiper with an orange line at the tip of the wiper blade, align the passenger-side wiper with an orange dot at the tip of the wiper blade, remove the covers, remove the nut from the wiper arm drive spindle, remove the upper hood assist rods, tilt the hood rearward to the air inlet grille panel, support the hood assembly, remove the wiper arm, clean the drive spindle knurls and remove the wiper blade from the wiper arm.