< Back ×
My Vehicle Change Vehicle
2009 Cadillac SRX
< Back to View All
Steering Racks & Gearboxes
- Department
- Prices
OEM (Genuine) 2009 Cadillac SRX Gear Assembly
PartNumber: 25983243
Product Specifications- Notes: Srx
- Other Names: Gear Assembly, Steering Gear
- Item Dimensions: 65.5 x 10.1 x 7.1 inches
- Item Weight: 26.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25848038, 25765135, 25820358, 10368440, 15257558
- Part Description: 2009 Cadillac SRX Gear Assembly
Vehicle Fitment- 2009 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
$516.30 MSRP:$819.74You Save: $303.44 (38%)
FAQ for Steering Gearbox Repair
Q: What is the recommended torque when you remove the steering gear bolts?
A:
You can tighten the bolts to 180 Nm (133 lb-ft).
By Bob
GM Specialist
01/11/2022Q: How do you replace the Power Steering Gear Solenoid/Actuator?
A:
You can remove the left front tire and wheel assembly, remove the front air deflector, place drain pans under the vehicle, disconnect the power steering gear solenoid/actuator wiring harness electrical connectors, remove the harness from the 2 plastic retainers, loosen the power steering gear solenoid/actuator from the steering gear and remove the power steering gear solenoid/actuator.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque when you install the power steering gear inlet hose bracket bolt?
A:
You can tighten the bolt to 23 Nm (17 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What is the proper way to install the Power Steering Gear Solenoid/Actuator?
A:
You can ensure the power steering gear solenoid/actuator has 2 O-ring seals visible beneath the hex, install the power steering gear solenoid/actuator to the steering gear, connect the power steering gear solenoid/actuator wiring harness, connect the power steering gear solenoid/actuator wiring harness electrical connectors, secure the harness in the 2 plastic retainers, clean any excess power steering fluid from the vehicle, remove the drain pans, install the front air deflector, install the left front tire and wheel assembly and fill and bleed the power steering system.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque when you tighten the right engine mount nut?
A:
You can tighten the nut to 80 Nm (59 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What is the first step for replacing the Steering Gear (Left Hand Drive)?
A:
The first step is to turn the steering wheel so that the front wheels are pointing straight ahead.
By Bob
GM Specialist
01/11/2022Q: What is the first step for replacing the Steering Gear (Right Hand Drive)?
A:
The first step is to turn the steering wheel so that the front wheels are pointing straight ahead.
By Bob
GM Specialist
01/11/2022See more FAQs (2)