< Back ×
My Vehicle Change Vehicle
2009 Cadillac SRX
< Back to View All
Power & Heated Seat
- Department
- Prices
OEM (Genuine) 2009 Cadillac SRX Adjust Switch
PartNumber: 10315826
Product Specifications- Notes: Driver Seat, Black; Passenger Seat, Black
- Other Names: Adjust Switch, Lumbar Switch, Switch
- Item Dimensions: 2.8 x 1.9 x 1.2 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25928038
- Part Description: 2009 Cadillac SRX Adjust Switch
Vehicle Fitment- 2009 Cadillac SRX | Base, Luxury, Performance, Premium | 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
$29.96 MSRP:$45.19You Save: $15.23 (34%)
OEM (Genuine) 2009 Cadillac SRX Lumbar Switch
PartNumber: 15210786
Product Specifications- Notes: Driver Seat, Cashmere; Passenger Seat, Cashmere
- Other Names: Lumbar Switch, Switch
- Item Dimensions: 2.2 x 1.3 x 1.1 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Cadillac SRX Lumbar Switch
Vehicle Fitment- 2009 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
$5.36 MSRP:$8.07You Save: $2.71 (34%)
OEM (Genuine) 2009 Cadillac SRX Seat Switch
PartNumber: 12450263
Product Specifications- Notes: Driver Seat; Srx; Left
- Other Names: Seat Switch, Switch
- Item Dimensions: 5.9 x 3.4 x 2.2 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Cadillac SRX Seat Switch
Vehicle Fitment- 2009 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
OEM (Genuine) 2009 Cadillac SRX Switch, Passenger Seat Reclining
PartNumber: 12450264
Product Specifications- Notes: Passenger Seat; Srx; Right
- Other Names: Adjuster Switch, Seat Switch, Switch
- Item Dimensions: 6.2 x 3.3 x 3.1 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Cadillac SRX Switch, Passenger Seat Reclining
Vehicle Fitment- 2009 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
OEM (Genuine) 2009 Cadillac SRX Switch Asm-Driver Seat & Passenger Seat Lumbar Conical*Gray L
PartNumber: 25772913Product Specifications- Notes: Driver Seat, Gray; Passenger Seat, Gray
- Other Names: Lumbar Switch
- Item Dimensions: 2.7 x 1.9 x 1.2 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Cadillac SRX Switch Asm-Driver Seat & Passenger Seat Lumbar Conical*Gray L
Vehicle Fitment- 2009 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
OEM (Genuine) 2009 Cadillac SRX Switch Asm-Driver Seat Heater
PartNumber: 25881821
Product Specifications- Notes: 2007-09
- Location: Driver Side
- Other Names: Seat Heat Switch, Switch
- Item Dimensions: 20.7 x 2.7 x 1.5 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15776581
- Part Description: 2009 Cadillac SRX Switch Asm-Driver Seat Heater
Vehicle Fitment- 2009 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
OEM (Genuine) 2009 Cadillac SRX Switch Asm-Passenger Seat Heater
PartNumber: 25881822Product Specifications- Notes: 2007-09
- Location: Passenger Side
- Other Names: Seat Heat Switch, Switch
- Item Dimensions: 17.6 x 2.8 x 1.4 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15776582
- Part Description: 2009 Cadillac SRX Switch Asm-Passenger Seat Heater
Vehicle Fitment- 2009 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
FAQ for Power Seat Switch Repair
Q: What is the removal procedure for the rear seat control module (rear seat Number 2)?
A:
The procedure is to remove the seat cushion frame, disconnect the electrical connector from the seat control module, remove the nuts from the control module and remove the module.
By Bob
GM Specialist
02/11/2022Q: How do you install the rear seat control module (rear seat Number 2)?
A:
You can install the seat control module onto the seat adjuster, install the seat control module nuts, connect the electrical connector to the control module, install the seat cushion frame and calibrate the seat.
By Bob
GM Specialist
02/11/2022Q: How do you install the power seat switch?
A:
You can install the wiring harness, connect the electrical connector, slide the power seat switch upward into the seat cushion frame, install the push-in fastener and the seat cushion cover, position the power seat switch bezel over the switches, engage the power seat switch bezel fasteners, install the power seat switch knobs and the seat cushion and enable the SIR system.
By Bob
GM Specialist
01/11/2022Q: How do you install the Rear Seat Number 2 Folding Actuator Switch (Rear Quarter Trim Front)?
A:
You can install the folding seat switch to the trim panel, install the body side rear trim panel and calibrate the seat.
By Bob
GM Specialist
01/11/2022Q: What is the proper way to replace the driver seat adjuster memory switch?
A:
You can insert a flat-bladed tool under the front edge of the switch assembly, disconnect the electrical connector from the switch, disengage the locking tabs from both sides of the switch and remove the switch.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the power seat switch?
A:
The procedure is to disable the SIR system, remove the seat cushion from the adjuster track, remove the knobs, locate the retainers securing the power seat switch bezel to the seat cushion frame, squeeze the retainers, remove the power seat switch bezel, release the J-channel retainers securing the seat cushion cover to the seat cushion frame, remove the push-in fastener, slide the power seat switch from the seat cushion frame and disconnect the electrical connector from the power seat switch.
By Bob
GM Specialist
01/11/2022Q: How do you install the lumbar switch?
A:
You can install the lumbar switch into the seat track trim cover, connect the electrical connector and install the seat track trim cover to the seat.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the Rear Seat Number 2 Folding Actuator Switch (Rear Quarter Trim Front)?
A:
The procedure is to remove the body side rear trim panel and remove the folding seat switch from the trim panel.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the lumbar switch?
A:
The procedure is to remove the seat track trim cover from the seat, disconnect the lumbar switch electrical connector and remove the lumbar switch.
By Bob
GM Specialist
01/11/2022Q: What should you do when the repair procedure has been completed?
A:
You should operate the seat adjuster switch in every direction until the seat adjuster reaches its mechanical hard stop by repeatedly pressing and releasing the switch as necessary.
By Bob
GM Specialist
01/11/2022See more FAQs (7)