2009 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
FAQ for Headlight Washer Pump Repair
Q: How do you replace the headlamp washer pump?
A:
You can remove the lower air deflector, remove the passenger side front wheelhouse liner, drain the washer solvent container, disconnect the washer hose, disconnect the electrical connector, hold the top of the washer pump with one hand, pry the pump from the washer solvent container, remove the washer pump and remove and discard the washer pump grommet.
By Bob
GM Specialist
01/11/2022
Q: What is the proper way to install the headlamp washer pump?
A:
You can install the washer pump grommet, lubricate the washer pump intake nozzle, install the washer pump nozzle, ensure the washer pump is secure to the washer solvent container, connect the electrical connector, connect the washer hose to the washer pump, install the passenger side front wheelhouse liner and the lower air deflector, open the hood, fill the washer solvent container and close the hood.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the removal procedure for the windshield washer pump?
A:
The procedure is to remove the lower air deflector, remove the passenger side front wheelhouse liner, drain the washer solvent into a suitable container, disconnect the washer hose, disconnect the electrical connector from the center Washer Pump and remove the washer pump.
Q: What is the proper way to install the windshield wiper blade?
A:
You can insert the hook of the wiper arm through the opening in the Wiper Blade, position the wiper blade pivot in the inside radius of the wiper arm hook, pull the wiper blade pivot into the wiper arm hook, ensure the blade is locked onto the wiper arm, return the wiper blades to the park position, operate the wipers and check for proper operation.
Q: What is the removal procedure for the windshield washer solvent level switch?
A:
The procedure is to remove the lower air deflector, disconnect the electrical connector, place a pan under the area where the level sensor will be removed, drain the washer solvent into a suitable container, pry outward the washer solvent container level sensor switch, remove the washer solvent level sensor switch and remove the washer solvent container level sensor grommet.