< Back ×
My Vehicle Change Vehicle
2009 Cadillac SRX
< Back to View All
Brake Boosters & Brake Master Cylinders
- Department
- Series
- Brands
- Prices
OEM (Genuine) 2009 Cadillac SRX Cylinder, Brake Master
PartNumber: 10367561
Product Specifications- Other Names: Master Cylinder
- Item Dimensions: 8.2 x 6.1 x 12.5 inches
- Item Weight: 2.20 Pounds
- Part Description: 2009 Cadillac SRX Cylinder, Brake Master
Vehicle Fitment- 2009 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
Centric® Premium™ Brake Master Cylinder for 2009 Cadillac SRX
PartNumber: 130.62138Product Specifications- UPC: 805890243731
- Part Description: 2009 Cadillac SRX Premium™ Brake Master Cylinder
Vehicle Fitment- 2009 Cadillac SRX | All Trims | All Engines
Cardone Reman® Remanufactured Master Cylinder for 2009 Cadillac SRX
PartNumber: 10-3161Product Specifications- Notes: Supplied w/o Reservoir
- Bore Diameter (N): 1.00"
- E-Waste: No
- Installation Hardware Included: No
- Master Cylinder Color/Finish: Gray
- Master Cylinder Material: Aluminum
- Mounting Hole Quantity: 2
- Package Contents: Master Cylinder, Reservoir Pin Kit
- Port Quantity: 2
- Primary Port Size: 1/2 x 20
- Product Condition: Remanufactured
- Reservoir Included: No
- Secondary Port Size: 1/2 x 20
- UPC: 082617693455
- Part Description: 2009 Cadillac SRX Remanufactured Master Cylinder
Vehicle Fitment- 2009 Cadillac SRX | All Trims | All Engines
FAQ for Brake Master Cylinder Repair
Q: What is the removal procedure for the master cylinder reservoir?
A:
The procedure is to remove the master cylinder and the fluid level sensor, drain the brake fluid, tap out the reservoir retaining pins, remove the reservoir and remove the seals.
By Bob
GM Specialist
01/11/2022Q: How do you bleed the master cylinder bench?
A:
You can secure the mounting flange of the brake master cylinder in a bench vise, remove the master cylinder reservoir cap and diaphragm, install suitable fittings to the master cylinder ports, install transparent hoses to the fittings, fill the master cylinder reservoir to at least the half-way point, ensure that the ends of the transparent hoses running into the master cylinder reservoir are fully submerged in the brake fluid, depress and release the primary piston, continue to depress and release the primary piston, remove the transparent hoses, install the master cylinder reservoir cap and diaphragm, remove the fittings with the transparent hoses and remove the master cylinder from the vise.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the master cylinder?
A:
The procedure is to remove the brake master cylinder, secure the mounting flange of the brake master cylinder in a bench vise, clean the outside of the master cylinder reservoir on and around the reservoir cap, remove the reservoir cap and diaphragm from the reservoir, inspect the reservoir cap and diaphragm, remove the master cylinder reservoir, depress the primary piston, remove the piston retainer, remove the primary piston assembly, plug the cylinder inlet ports and the rear outlet port and discard the primary piston assembly, the piston retainer, and the seals and seal retainer.
By Bob
GM Specialist
01/11/2022Q: What is the recommended type of brake fluid when adding fluid to the brake master cylinder reservoir?
A:
You can use only Delco Supreme 11(R), GM P/N 12377967 (Canadian P/N 992667), or equivalent DOT-3 brake fluid from a clean, sealed brake fluid container.
By Bob
GM Specialist
01/11/2022Q: What is the proper way to install the master cylinder?
A:
You can install the brake master cylinder reservoir, bench bleed the master cylinder, install the master cylinder to the vacuum brake booster, install the 2 brake master cylinder mounting nuts, rotate the air inlet panel support bracket, install the air inlet panel support bracket push nut, remove the plugs, install the brake pipes, connect the electrical connector and bleed the hydraulic brake system.
By Bob
GM Specialist
01/11/2022Q: How do you install the master cylinder reservoir?
A:
You can inspect the reservoir for cracks or deformities, clean and dry the reservoir, lubricate the new seals and the reservoir bayonets, install the seals, install the reservoir, tap in the reservoir retaining pins, fill the master cylinder reservoir, install the brake fluid level sensor and install the master cylinder.
By Bob
GM Specialist
01/11/2022Q: How do you replace the master cylinder?
A:
You can disconnect the electrical connector, disconnect the brake pipes, plug the open brake pipe fitting ends, remove the air inlet panel support bracket push nut, pull the air inlet panel support bracket outward, remove the 2 master cylinder mounting nuts, remove the master cylinder and remove the reservoir.
By Bob
GM Specialist
01/11/2022Q: How do you install the master cylinder?
A:
You can clean the interior and exterior of the master cylinder, the secondary piston, and the return spring, inspect the master cylinder bore, inlet and outlet ports, the secondary piston, and the return spring, and dry the master cylinder and the individual components, lubricate the master cylinder bore, the secondary piston, the return spring and all of the individual overhaul components, assemble the lubricated, new primary seal and retainer and new secondary seal, install the lubricated return spring and secondary piston assembly, install the lubricated, new primary piston assembly, depress the primary piston, install the new piston retainer, install the master cylinder reservoir, install the reservoir cap and diaphragm and install the master cylinder.
By Bob
GM Specialist
01/11/2022See more FAQs (3)