< Back ×
My Vehicle Change Vehicle
2009 Cadillac SRX
< Back to View All
Alternators, Batteries & Starters
- Department
- Brands
- Prices
OEM (Genuine) 2009 Cadillac SRX Cable Asm-Battery Positive
PartNumber: 25831922
Product Specifications- Notes: 3.6 Liter
- Other Names: Positive Cable
- Item Dimensions: 4.1 x 12.1 x 10.6 inches
- Item Weight: 3.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Cadillac SRX Cable Asm-Battery Positive
Vehicle Fitment- 2009 Cadillac SRX | Base | 6 Cyl 3.6 L GAS
Deka® Positive Battery Cable for 2009 Cadillac SRX
PartNumber: 08865Product Specifications- Color: BLACK
- Gauge: 4
- Length: 7.5 IN
- Nominal OD: 0.354
- Terminal Type: TOP (UNIV)
- UPC: 083996088658
- Part Description: 2009 Cadillac SRX Positive Battery Cable
Vehicle Fitment- 2009 Cadillac SRX | All Trims | 6 Cyl 3.6L
- 2009 Cadillac SRX | All Trims | 8 Cyl 4.6L
OEM (Genuine) 2009 Cadillac SRX Cable Asm-Battery Positive
PartNumber: 25848936
Product Specifications- Notes: 4.6 Liter
- Other Names: Positive Cable
- Item Dimensions: 4.2 x 12.1 x 10.2 inches
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Cadillac SRX Cable Asm-Battery Positive
Vehicle Fitment- 2009 Cadillac SRX | Base | 8 Cyl 4.6 L GAS
OEM (Genuine) 2009 Cadillac SRX Cable Asm-Battery Negative
PartNumber: 25848942
Product Specifications- Notes: 3.6 Liter
- Other Names: Negative Cable
- Item Dimensions: 4.1 x 12.1 x 10.2 inches
- Item Weight: 3.10 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Cadillac SRX Cable Asm-Battery Negative
Vehicle Fitment- 2009 Cadillac SRX | Base | 6 Cyl 3.6 L GAS
OEM (Genuine) 2009 Cadillac SRX Cable Asm-Battery Negative
PartNumber: 25848940
Product Specifications- Notes: 4.6 Liter
- Other Names: Negative Cable
- Item Dimensions: 11.6 x 9.9 x 4.7 inches
- Item Weight: 2.90 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2009 Cadillac SRX Cable Asm-Battery Negative
Vehicle Fitment- 2009 Cadillac SRX | Base | 8 Cyl 4.6 L GAS
FAQ for Battery Cables Repair
Q: What is the removal procedure for the Battery Negative Cable (LY7 (RHD)) (3.6L)?
A:
The procedure is to remove the fuel injector sight shield, disconnect the negative battery cable, disconnect the instrument panel (I/P) wiring harness electrical connector from the negative battery cable electrical connector, disconnect the I/P wiring harness electrical connector from the battery current sensor, remove the negative battery cable ground bolt, remove the negative cable ground bolt at the cylinder head and remove the negative battery cable from the vehicle.
By Bob
GM Specialist
01/11/2022Q: How do you install the Battery Negative Cable (LY7 and LLT (LHD) with Top Post) (3.6L)?
A:
You can position the negative battery cable, install the bolt securing the negative battery cable to the engine block, connect the cable retaining clip from the stud on the shock tower, install the bolt securing the negative battery cable to the shock tower, connect the I/P harness electrical connector to the battery current sensor and connect the negative battery cable.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque when you install the transmission lower bell housing bolt?
A:
You can tighten the bolt to 50 Nm (37 lb-ft).
By Bob
GM Specialist
01/11/2022Q: How do you replace the battery positive cable (LY7 and LLT (LHD) with Top Post) (3.6L)?
A:
You can disconnect the battery negative cable, rotate the lever on the battery clamp, disconnect the battery positive cable, remove the cover from the electrical center, remove the nut securing the battery positive cable to the electrical center, raise the vehicle, reposition the protective boot from the generator output BAT terminal, remove the generator output BAT terminal nut, disconnect the battery positive lead, remove the starter terminal nut, disconnect the battery positive cable from the starter and remove the battery positive cable from the engine.
By Bob
GM Specialist
01/11/2022Q: What is the first step for replacing the Battery Positive Cable (LY7 (RHD)) (3.6L)?
A:
The first step is to disconnect the negative battery cable.
By Bob
GM Specialist
01/11/2022Q: How do you install the Battery Negative Cable (LY7 (RHD)) (3.6L)?
A:
You can position the negative cable to the cylinder head, install the negative battery cable ground bolt, position the negative battery cable to the strut tower, install the negative battery cable ground bolt, connect the I/P wiring harness electrical connector to the battery current sensor and the negative battery cable electrical connector, connect the negative battery cable and install the fuel injector sight shield.
By Bob
GM Specialist
01/11/2022Q: What is the proper way to install the battery positive cable (LY7 and LLT (LHD) with Top Post) (3.6L)?
A:
You can position the battery positive cable to the engine, connect the battery positive cable to the starter, install the starter terminal nut, connect the battery positive lead to the generator, install the generator BAT terminal nut, install the protective boot, lower the vehicle, install the nut securing the battery positive cable to the underhood fuse block, install the electrical center cover, connect the battery positive cable to the battery, rotate the lever on the battery clamp and connect the battery negative cable.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque when you install the battery-positive cable to the starter and install the starter terminal nut?
A:
You can tighten the nut to 10 Nm (89 lb in).
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the Battery Negative Cable (LY7 and LLT (LHD) with Top Post) (3.6L)?
A:
The procedure is to disconnect the negative battery cable, disconnect the I/P harness electrical connector, disconnect the cable retaining clip, remove the bolt securing the negative battery cable to the shock tower, raise the vehicle, remove the bolt securing the negative battery cable to the engine block, lower the vehicle and remove the negative battery cable.
By Bob
GM Specialist
01/11/2022See more FAQs (4)