2009 Cadillac SRX Air Bag Clockspring

You can position the block tooth on the upper steering shaft to the 12 o'clock position, install the inflatable restraint steering wheel module coil washer, align and install the inflatable restraint steering wheel module coil with the turn signal switch cancel cam, remove the inflatable restraint steering wheel module coil centering tab, install the inflatable restraint steering wheel module coil retaining ring, connect the inflatable restraint steering wheel module coil electrical harness, install the steering column trim covers, install the knee bolster and enable the SIR system.

You should verify the wheels on the vehicle are straight ahead, that the block tooth of the upper steering shaft is in the 12 o'clock position, and that the ignition and start switch is in the LOCK position.

The procedure is to disable the SIR system, remove the knee bolster and the steering column trim covers, disconnect the inflatable restraint steering wheel module coil electrical connectors and the inflatable restraint steering wheel module coil electrical harness and remove the inflatable restraint steering wheel module coil retaining ring, the inflatable restraint steering wheel module coil, and the inflatable restraint steering wheel module coil washer.

You should hold the coil face-up, rotate the coil hub in the direction of the arrow, rotate the coil hub counterclockwise for 2 1/2 revolutions, align the coil hub with the turn signal switch cancel cam and slide it onto the upper steering shaft.