Part Description: 2009 Cadillac DTS Bolt/Screw-Rear Suspension Control Arm
More Info
Vehicle Fitment
2009 Cadillac DTS | Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS
FAQ for Camber and Alignment Kit Repair
Q: What kind of special tool do you need for an alignment?
A:
You need a camber adjustment tool.
By Bob
GM Specialist
01/11/2022
Q: What is the proper way to perform a wheel alignment?
A:
The proper way is to loosen the jam nut, rotate the tie rod, and readjust the toe setting.
By Bob
GM Specialist
01/11/2022
Q: How do you adjust the front camber?
A:
You can remove the tires/wheels, and the nuts, replace the strut, install the bolts, and align the wheels.
By Bob
GM Specialist
01/11/2022
Q: What is the adjustment procedure for the front camber?
A:
The procedure is to remove the nuts, separate the strut, install the bolts, and perform a wheel alignment.
By Bob
GM Specialist
01/11/2022
Q: What is the rear toe adjustment procedure?
A:
First, loosen the cam lock nut on the adjustment link and tighten the cam lock nut to 105 Nm.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the power steering return hose installation procedure?
A:
First, install the Power Steering Hose to the vehicle and the frame brackets. After that install the power steering return hose to the power steering gear and tighten it to 30 Nm. Next, install the power steering return hose to the wiring harness with a new tie strap and install the front air deflector. Finally, install the power steering gear heat shield.
Q: What is the steering knuckle service procedure?
A:
Tighten the Steering Knuckle nuts to 177 Nm and perform a wheel alignment.
Q: What is the intermediate shaft seal service procedure?
A:
First, remove the steering column and the power vacuum brake booster. Make sure to tighten the intermediate Steering Shaft seal bolts to 3 Nm.