First, drain the cooling system, remove the drive belt, remove fluid from the power steering pump reservoir, and remove the power steering pump pulley. After that disconnect the power steering hoses and pipes from the power steering pump and reservoir. Next, remove the water pump bolts, remove the water pump, and the gasket. Remove the camshaft position sensor, unclip the wiring harness, and disconnect the engine coolant air bleed pipe hoses and clamps. Remove the three coolant pump manifold, disconnect the heater/radiator hoses, remove the coolant pump manifold bolts, and remove the coolant pump manifold/gaskets. Next, remove the thermostat housing bolts, the thermostat housing, and the O-ring seal.
By BobGM Specialist
17/12/2021