Part Description: 2009 Buick LaCrosse Premium™ Front Stabilizer Bar Link
More Info
Vehicle Fitment
2009 Buick LaCrosse | All Trims | 6 Cyl 3.8L
$3.89
FAQ for Sway Bar Link Repair
Q: How many nuts are attached to the stabilizer shaft link?
A:
There is one nut attaching the stabilizer shaft link.
By Omar
GM Specialist
16/12/2021
Q: What will I need to remove to access the part?
A:
You will need to remove the wheel and tire assembly.
By Bob
GM Specialist
15/12/2021
Q: What is the recommended bolt torque for the stabilizer link?
A:
The recommended bolt torque is 23 Nm (17 LB. FT.).
By Omar
GM Specialist
15/12/2021
Q: What is the recommended bolt torque for the stabilizer shaft link nut?
A:
The recommended torque is 50 Nm (37 lb. ft.).
By Omar
GM Specialist
15/12/2021
FAQ for Other Repair Info
Q: What is the proper way to install the rear brake caliper?
A:
The proper way is to clean all the parts in denatured alcohol, dry them with low pressure, and install the brake pad retainers, the brake pads, and the Brake Caliper.
Q: What are the procedures for the master cylinder bench bleeding?
A:
The procedures are to secure the mounting flange of the Brake Master Cylinder and remove the cylinder reservoir, transparent hoses, and the master cylinder.
Q: What is the removal procedure for the intermediate steering shaft?
A:
The procedure is to position the seal to prove access to the pinch bolts and remove the bolts and the intermediate Steering Shaft.