Part Description: 2009 Buick LaCrosse Front Standard Subframe Bushing Kit
More Info
Vehicle Fitment
2009 Buick LaCrosse | All Trims | All Engines
$45.84
FAQ for Subframe Bushing Repair
Q: How do you install the drivetrain and front suspension frame rear insulator?
A:
You can install the rear insulator by applying the lubricant to the upper and lower insulator as well as installing the insulator and installing the frame.
By Omar
GM Specialist
28/12/2021
Q: What is the removal procedure for the drivetrain and front suspension frame rear insulator?
A:
The procedure is to remove the frame and remove the upper and lower insulators from the frame.
By Omar
GM Specialist
25/12/2021
Q: What is the installation procedure for the drivetrain and front suspension frame front insulator?
A:
The procedure is to clean the insulator opening, apply lubricant, and align the front frame insulator to the opening, install the front upper insulators and the frame.
By Omar
GM Specialist
23/12/2021
Q: How do you remove the drivetrain and front suspension frame front insulator?
A:
You can remove the frame front insulator by removing the frame and front upper insulators.
By Omar
GM Specialist
14/10/2021
FAQ for Other Repair Info
Q: What is the front lower control arm bushing (horizontal) removal procedure?
A:
Remove the lower control arm and secure the lower control arm in a vise. Remember to use a 1/2 x 20 in standard thread nut with the puller bolt. Tighten the puller bolt until the bushing is removed, and disassemble the J 21474-01 and 21474-5.
Q: What is the recommended bolt torque for the stabilizer shaft insulator bracket?
A:
The recommended bolt torque is 48 Nm (35 lb. ft.).