< Back ×
My Vehicle Change Vehicle
2009 Buick LaCrosse
< Back to View All
Emission Control
- Department
- Brands
- Prices
OEM (Genuine) 2009 Buick LaCrosse Check Valve
PartNumber: 12660126
Product Specifications- Other Names: Check Valve
- Item Dimensions: 6.3 x 12.2 x 11.4 inches
- Item Weight: 4.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12593052, 12619122
- Part Description: 2009 Buick LaCrosse Check Valve
Vehicle Fitment- 2009 Buick LaCrosse | CX, CXL, CXS, Super | 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS
$268.45 MSRP:$506.50You Save: $238.05 (47%)
Dorman® OE Solutions Secondary Air Injection Check Valve for 2009 Buick LaCrosse
PartNumber: 911-154Product Specifications- Notes: w/Calif Emissions; Partial Zero Emissions Vehicle (PZEV); Packaging Type: Box
- Color: Black, Silver
- Inlet Size: 0.94"
- Material: Cast Aluminum
- Maximum Pressure Rating: 18 PSI
- OE Part Number: 1231486, 12619125
- Outlet Size: 0.8"
- UPC: 019495490999
- Valve type: Solenoid
- Working Temperature Range: -40C To 125C
- Part Description: 2009 Buick LaCrosse OE Solutions Secondary Air Injection Check Valve
Vehicle Fitment- 2009 Buick LaCrosse | All Trims | 6 Cyl 3.8L
$146.60
FAQ for Secondary Air Injection Check Valve Repair
Q: What is the proper way to install the secondary Air Injection shut-off valve outlet pipe?
A:
The proper way is to install the AIR pump hose to the vehicle, position and release the clamp from the AIR pump and install the fuel injector shield.
By Bob
GM Specialist
27/12/2021Q: How many pins does the Secondary Air Injection shutoff valve have?
A:
The Air injection shutoff valve has 6 pins in total. Pins and Functions Pin 1 - Low reference Pin 2 - Air pressure sensor signal pin 3 - 5-volt reference 1 pin 4 - Ground.
By Bob
GM Specialist
21/12/2021Q: How do you remove the secondary Air Injection shut-off valve outlet pipe?
A:
You can remove the outlet pipe by removing the following: the fuel injector sight shield, air cleaner, and the AIR pump outlet hose.
By Bob
GM Specialist
21/12/2021Q: What is the proper way to remove the secondary Air Injection shutoff valve?
A:
The proper way is to remove the fuel injector sight shield and the AIR pump outlet, disconnect the engine wiring harness from the check valve, and remove the AIR check valve.
By Bob
GM Specialist
15/12/2021Q: What is the installation procedure for the secondary Air injection shutoff valve?
A:
The procedure is to install a new AIR check valve to the gasket, position the air valve, connect the engine wiring harness, and install the fuel injector sight shield.
By Bob
GM Specialist
14/12/2021