Part Description: 2009 Buick LaCrosse Lumbar Switch
More Info
Vehicle Fitment
2009 Buick LaCrosse | Base, CX, CXL, CXS, Leather, Premium, Sport Touring, Super | 4 Cyl 2.4 L ELECTRIC/GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS
Part Description: 2009 Buick LaCrosse Knob-Driver Seat Adjuster Switch *Neutral L
More Info
Vehicle Fitment
2009 Buick LaCrosse | CX, CXL, CXS, Super | 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS
FAQ for Power Seat Switch Repair
Q: How many screws does the seat adjuster finish cover have?
A:
The seat adjuster finish cover has a total of 3 screws.
By Bob
GM Specialist
17/12/2021
Q: What is the front seat center latch side belt removal procedure?
A:
First, remove the front seat, pull out to remove the bolt covers on both sides of the seat, and remove the seat belt bolts. Finally, remove the seat belt from the front seat.
By Bob
GM Specialist
17/12/2021
Q: What is the front seat center latch side belt installation procedure?
A:
First position the seatbelt to the front seat, install the center seat belt bolts and tighten the seat belt retractor bolt to 42 Nm. Next, install the bolt covers on both sides of the seat, and install the front seat.
By Omar
GM Specialist
17/12/2021
FAQ for Other Repair Info
Q: What is the driver/passenger seat back cushion heater removal procedure?
A:
First, remove the front seat, disconnect the electrical connector from the seat back cushion heater, and remove the seat back cover. Finally, pull on the heater element to remove the element from the seat back.