Part Description: 2009 Buick LaCrosse Spin-On Lube Engine Oil Filter
More Info
Vehicle Fitment
2009 Buick LaCrosse | Super | 8 Cyl 5.3L
FAQ for Oil Filter Repair
Q: How tight should the new oil filter be installed?
A:
Tighten the new oil filter to 3/4 to 1 full turn.
By Omar
GM Specialist
23/12/2021
Q: What is the installation procedure for the oil pump suction pipe and screen?
A:
The procedure is to install the new oil pump pipe, the gasket, and the oil pan and inspect the oil pressure.
By Bob
GM Specialist
16/12/2021
Q: What is the recommended bolt torque for the drain plug?
A:
The recommended bolt torque is 30 Nm (22 lb. ft.).
By Omar
GM Specialist
15/12/2021
Q: How do you remove the oil pump suction pipe and screen?
A:
You can remove the oil pan as well as the oil pump and gasket.
By Bob
GM Specialist
27/12/2020
FAQ for Other Repair Info
Q: How do you install the oil pump?
A:
You can install the Oil Pump using the bolts and install the case side cover.
Q: What is the proper way to remove the oil pan?
A:
The proper way is to remove the following: the fuel injector sight shield, the air cleaner intake duct, the oil level sensor wiring harness, and remove the Oil Pan.
Q: What is the recommended bolt torque for the oil level indicator nut?
A:
The recommended bolt torque is 19 Nm (14 lb. ft.).