FAQ for Brake Pad Set Repair
Q: How do you install the brake pedal assembly?
A:
You can install the brake pivot bushings and spacer, the brake pedal, the wiring harness, and the left instrument panel insulator.
By OmarGM Specialist
26/12/2021 Q: What is the removal procedure for the brake pedal assembly?
A:
The procedure is to remove the brake pedal sensor, wiring harness clips, brake pedal, and brake pedal pivot bushings.
By OmarGM Specialist
23/12/2021 Q: Is burnishing brake pads and rotors necessary?
A:
Yes, it is necessary to make sure the braking surfaces are properly working.
By OmarGM Specialist
23/12/2021 Q: Could you reuse the spring retainers when you are replacing the brake pads?
A:
You cannot reuse the spring retainers, install new spring retainers.
By OmarGM Specialist
21/12/2021 Q: How thick do brake pads have to be for the 2009 Buick LaCrosse?
A:
The brake pads have to be a minimum of 0.76MM.
By BobGM Specialist
20/12/2021 Q: How many retainers does the spring have?
A:
The spring has a total of 2 retainers.
By BobGM Specialist
18/10/2021 Q: How do you install the rear disc brake pads?
A:
You can install the retainers and pads to the caliper bracket, install the upper caliper bolt, and the rear wheel lug nut, and burnish the pads/rotors.
By BobGM Specialist
18/10/2021 Q: How do you remove the rear disc brake pads?
A:
To remove the rear disc brake pads you have to remove the following: the caliper guide pin, remove the brake pads, and 2 pad clips from the caliper bracket.
By BobGM Specialist
24/11/2020 See more FAQs (3)