FAQ for Body Control Module Repair
Q: What is the cause of the vehicle not starting, MIL illumination, and service lamp illumination?
A:
The cause may be vibration, thermal cycling, or poor connection/terminal retention.
By BobGM Specialist
30/12/2021 Q: What is the removal procedure for the body control module?
A:
The procedure is to remove the left instrument panel trim cover, remove the I/P insulator, and the bracket screws and remove the BCM.
By BobGM Specialist
24/12/2021 Q: How many bolts does the communication interface module have?
A:
The communication interface module has a total of 3 bolts. Each bolt needs to be tightened to 10 Nm.
By BobGM Specialist
21/12/2021 Q: How many pins does the Body Control Module X1 have?
A:
The Body Control Module X1 has a total of 52 pins. Pins and Functions: Pin 1 - Front Windshield Wiper Switch High Signal Pin 2 - Security System Sensor Supply Voltage Pin 3 - Ignition Voltage Pin 4 - Horn Relay Control Pin 6 - RAP Relay Control Pin 7 - Headlamp High Beam Relay Control Pin 8 - Fog Lamp Relay Control.
By BobGM Specialist
20/12/2021 Q: How many components does the instrument panel for the 2009 Buick LaCrosse have?
A:
The 2009 Buick LaCrosse has a total of 11 components.
By BobGM Specialist
20/12/2021 Q: How many components does the instrument panel/center console have?
A:
The instrument panel has a total of 11 components. Instrument Panel Components 1 - I/P Compartment Lamp Switch 2 - HVAC Control Module 3 - Radio 4 - Air Temperature Sensor 5 - Steering Wheel 6 - Instrument Panel Cluster 7 - Body Control Module.
By OmarGM Specialist
20/12/2021 Q: How do you install the body control module?
A:
You can install the BCM to the bracket using the BCM screws, connect the electrical connectors, and install the left I/P trim cover.
By OmarGM Specialist
03/11/2021 Q: How many pins does the vehicle communication interface module have?
A:
The Vehicle communication interface module X1 has a total of 16 pins and the module X2 has 12.
By OmarGM Specialist
03/11/2021 See more FAQs (3)