Part Description: 2009 Buick LaCrosse Premium™ Front Lower Ball Joint
Vehicle Fitment
2009 Buick LaCrosse | All Trims | All Engines
$26.69
FAQ for Ball Joint Repair
Q: Are any special tools needed to replace a ball joint?
A:
Yes, you will need a ball joint/stud separator part number J41820.
By Bob
GM Specialist
23/12/2021
Q: How tight do the castle nuts for the ball joint studs need to be?
A:
The ball joint nut needs to be tightened to 20 Nm (15 lb./ft.).
By Omar
GM Specialist
20/12/2021
Q: What is the torque specification for ball stud nuts?
A:
The ball stud nut needs to be torqued to 68 Nm (50 lb./ft.).
By Omar
GM Specialist
14/12/2021
FAQ for Other Repair Info
Q: What is the proper way to install the rear brake caliper?
A:
The proper way is to clean all the parts in denatured alcohol, dry them with low pressure, and install the brake pad retainers, the brake pads, and the Brake Caliper.
Q: What are the procedures for the master cylinder bench bleeding?
A:
The procedures are to secure the mounting flange of the Brake Master Cylinder and remove the cylinder reservoir, transparent hoses, and the master cylinder.
Q: What is the removal procedure for the intermediate steering shaft?
A:
The procedure is to position the seal to prove access to the pinch bolts and remove the bolts and the intermediate Steering Shaft.