< Back ×
My Vehicle Change Vehicle
2008 GMC Yukon
< Back to View All
Valves, Valve Covers & Valvetrain
- Department
- Brands
- Prices
OEM (Genuine) 2008 GMC Yukon Valve Lifters
PartNumber: 17122490
Product Specifications- Notes: Tahoe, Yukon, Escalade; Non-Active Fuel Management
- Other Names: Valve Lifters
- Item Dimensions: 8.8 x 3.1 x 1.1 inches
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 5234670, 05234670
- Part Description: 2008 GMC Yukon Valve Lifters
Vehicle Fitment- 2008 GMC Yukon | Denali, Denali Hybrid, Hybrid, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L ELECTRIC/FLEX, 8 Cyl 6.0 L ELECTRIC/GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
$36.57 MSRP:$60.54You Save: $23.97 (40%)OEM (Genuine) 2008 GMC Yukon LIFTER ASM-VLV (AFM)
PartNumber: 12680871
Product Specifications- Other Names: Valve Lifters
- Item Dimensions: 4.0 x 2.1 x 2.1 inches
- Item Weight: 4.30 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 12698946
- Part Description: 2008 GMC Yukon LIFTER ASM-VLV (AFM)
Vehicle Fitment- 2008 GMC Yukon | AT4, Denali, Denali Hybrid, Hybrid, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L ELECTRIC/FLEX, 8 Cyl 6.0 L ELECTRIC/GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
$45.80 MSRP:$79.72You Save: $33.92 (43%)
Sealed Power® Valve Lifter for 2008 GMC Yukon
PartNumber: HT-2303Product Specifications- Notes: Active Fuel Management Engine;For Int. & Exh. on Cyl. 1-4-6-7; Use Part No. HT2148 for Int. & Exh. on Cyl. 2-3-5-8; For Int. & Exh. on Cyl. 1-4-6-7; Use Part No. HT2148 for Int. & Exh. on Cyl. 2-3-5-8
- UPC: 614046896635
- Part Description: 2008 GMC Yukon Valve Lifter
Vehicle Fitment- 2008 GMC Yukon | All Trims | 8 Cyl 6.2L
- 2008 GMC Yukon | All Trims | 8 Cyl 5.3L
- 2008 GMC Yukon | All Trims | 8 Cyl 6.0L
$41.69
Sealed Power® Hydraulic Roller Valve Lifter for 2008 GMC Yukon
PartNumber: HT-2148Product Specifications- Notes: Active Fuel Management Engine;Hydraulic Roller Lifters;Non Active Fuel Management Eng;For Int. & Exh. on Cyl. 2-3-5-8; Use Part No. HT2303 for Int. & Exh. on Cyl. 1-4-6-7
- Note: O.E. Replacement
- UPC: 724956564873
- Part Description: 2008 GMC Yukon Hydraulic Roller Valve Lifter
Vehicle Fitment- 2008 GMC Yukon | All Trims | 8 Cyl 4.8L
- 2008 GMC Yukon | All Trims | 8 Cyl 5.3L
- 2008 GMC Yukon | All Trims | 8 Cyl 6.2L
- 2008 GMC Yukon | All Trims | 8 Cyl 6.0L
Sealed Power® Engine Valve Lifter for 2008 GMC Yukon
PartNumber: HT-2148BProduct Specifications- Notes: Box of 128;Active Fuel Management Engine;Hydraulic Roller Lifters;Bulk Pack;Non Active Fuel Management Eng;For Int. & Exh. on Cyl. 2-3-5-8; Use Part No. HT2303 for Int. & Exh. on Cyl. 1-4-6-7
- Note: O.E. Replacement
- Package Alert: Carton of 128
- UPC: 724956696369
- Part Description: 2008 GMC Yukon Engine Valve Lifter
Vehicle Fitment- 2008 GMC Yukon | All Trims | 8 Cyl 4.8L
- 2008 GMC Yukon | All Trims | 8 Cyl 5.3L
- 2008 GMC Yukon | All Trims | 8 Cyl 6.2L
- 2008 GMC Yukon | All Trims | 8 Cyl 6.0L
Sealed Power® Valve Lifter for 2008 GMC Yukon
PartNumber: HT-2303BProduct Specifications- Notes: Active Fuel Management Engine;Bulk Pack;Box of 50;For Int. & Exh. on Cyl. 1-4-6-7; Use Part No. HT2148 for Int. & Exh. on Cyl. 2-3-5-8; For Int. & Exh. on Cyl. 1-4-6-7; Use Part No. HT2148 for Int. & Exh. on Cyl. 2-3-5-8
- UPC: 019826234780
- Part Description: 2008 GMC Yukon Valve Lifter
Vehicle Fitment- 2008 GMC Yukon | All Trims | 8 Cyl 6.2L
- 2008 GMC Yukon | All Trims | 8 Cyl 5.3L
- 2008 GMC Yukon | All Trims | 8 Cyl 6.0L
FAQ for Valve Lifter Repair
Q: What's the recommended torque for the valve lifter oil manifold bolts?
A:
The recommended torque is 25 N.m.
By Bob
GM Specialist
02/11/2022Q: How do you install the Valve Lifter Oil Filter?
A:
You can install a NEW valve lifter oil filter O-ring seal into the valve lifter oil manifold, install the NEW valve lifter oil filter, apply sealant GM P/N 12346004 (Canadian P/N 10953480) or equivalent, install the oil pressure sensor washer and sensor, connect the engine harness electrical connector to the oil pressure sensor and install the intake manifold.
By Bob
GM Specialist
02/11/2022Q: What's the recommended torque for the valve lifter guide bolts?
A:
The recommended torque is 12 N.m.
By Bob
GM Specialist
02/11/2022Q: How do you install the Valve Lifter?
A:
You can lubricate the valve lifters and engine block valve lifter bores with clean engine oil, insert the valve lifters into the lifter guides, align the flat area on the top of the lifter with the flat area in the lifter guide bore, push the lifter completely into the guide bore, install the valve lifters and guide to the engine block, install the valve lifter guide bolts and install the cylinder head and gasket.
By Bob
GM Specialist
02/11/2022Q: How do you remove the Valve Lifter Oil Filter?
A:
You can remove the intake manifold, disconnect the engine harness electrical connector from the oil pressure sensor, remove the oil pressure sensor and washer, remove and discard the valve lifter oil filter, and remove and discard the valve lifter oil filter O-ring seal.
By Bob
GM Specialist
02/11/2022Q: How do you install the Valve Lifter Oil Manifold?
A:
You can place the service gasket onto the valve lifter oil manifold, install the valve lifter oil manifold to the engine, install the valve lifter oil manifold bolts, connect the engine harness electrical connector to the oil pressure sensor and install the intake manifold.
By Bob
GM Specialist
02/11/2022Q: How do you remove the Valve Lifter Oil Manifold?
A:
You can remove the intake manifold, disconnect the engine harness electrical connector from the oil pressure sensor, avoid lifting the valve lifter oil manifold by the electrical lead frame, remove the valve lifter oil manifold bolts, remove the valve lifter oil manifold, identify the 8 gasket retaining strap locations, use a cutter type tool, cut the 8 retaining straps and remove the outer gasket from the valve lifter oil manifold.
By Bob
GM Specialist
02/11/2022See more FAQs (2)