< Back ×
My Vehicle Change Vehicle
2008 GMC Yukon
< Back to View All
Air Filters & Intake Systems
- Department
- Brands
- Prices
OEM (Genuine) 2008 GMC Yukon Throttle Body
PartNumber: 12679524
Product Specifications- Notes: Tahoe, Yukon, Escalade
- Other Names: Throttle Body
- Item Dimensions: 10.7 x 6.9 x 5.4 inches
- Item Weight: 2.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12572658, 12580760
- Part Description: 2008 GMC Yukon Throttle Body
Vehicle Fitment- 2008 GMC Yukon | Denali, Hybrid, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L ELECTRIC/GAS, 8 Cyl 6.2 L GAS
$277.23 MSRP:$523.10You Save: $245.87 (48%)
Dorman® Throttle Body Assemblies for 2008 GMC Yukon
PartNumber: 977-014Product Specifications- Adjustable: No
- Color/Finish: Gray and Black
- Connector/Terminal Type: Male/Blade
- Electrical Connection Type: Female/Blade
- Housing Material: Aluminum
- Installation Hardware Included: No
- OE Part Number: 12580760, 217-2422
- UPC: 019495277194
- Part Description: 2008 GMC Yukon Throttle Body Assemblies
Vehicle Fitment- 2008 GMC Yukon | All Trims | 8 Cyl 4.8L
- 2008 GMC Yukon | All Trims | 8 Cyl 5.3L
- 2008 GMC Yukon | All Trims | 8 Cyl 6.2L
- 2008 GMC Yukon | All Trims | 8 Cyl 6.0L
$117.88
Cardone Reman® Remanufactured Throttle Body for 2008 GMC Yukon
PartNumber: 67-3008Product Specifications- Notes: Relearn procedure may need to be performed upon installation of unit. Please refer to the service manual for vehicle specific instructions.
- Gaskets Included: No Gasket Required
- Housing Color/Finish: Gray/Unfinished
- Housing Material: Aluminum
- Product Condition: Remanufactured
- Throttle Body Actuation Type: Electric
- Throttle Body Inlet Shape: Round
- Throttle Body Outlet Shape: Round
- Throttle Position Sensor Included: Yes
- Part Description: 2008 GMC Yukon Remanufactured Throttle Body
Vehicle Fitment- 2008 GMC Yukon | All Trims | 8 Cyl 6.2L
- 2008 GMC Yukon | All Trims | All Engines
$83.15
Spectra Premium® Fuel Injection Throttle Body for 2008 GMC Yukon
PartNumber: TB1011Product Specifications- Connector: 6 Pin Male
- Inside Diameter: 3 7/16"
- Length: 7 1/8"
- UPC: 627785015069
- Width: 5 3/4"
- Part Description: 2008 GMC Yukon Fuel Injection Throttle Body
Vehicle Fitment- 2008 GMC Yukon | All Trims | 8 Cyl 4.8L
- 2008 GMC Yukon | All Trims | 8 Cyl 5.3L
- 2008 GMC Yukon | All Trims | 8 Cyl 6.2L
- 2008 GMC Yukon | All Trims | 8 Cyl 6.0L
$124.45
hitachi® Fuel Injection Throttle Body for 2008 GMC Yukon
PartNumber: ETB0024Product Specifications- Notes: Includes: Gasket; Grade: Actual OE; Terminal Quantity: 6; Availability: Available to Order; Bore Dia: 87.0; Gasket Or Seal Included: Yes; Idle Air Control Motor Included: No; Throttle Body Type: Electric; Throttle Position Sensor Included: Yes
- Actuation Type: Electric
- Bore Diameter: 87.0 mm
- Gasket or Seal Included: Yes
- Hardware Included: No
- Idle Air Control Motor Included: No
- Manufacturer: Hitachi
- New or Remanufactured: New
- OE Part Number: 12580760
- Qty Needed Per Unit: 1
- Terminal Connector Type: Blade
- Terminal Gender: Male
- Terminal Quantity: 6
- Throttle Body Type: Electric
- Throttle Position Sensor Included: Yes
- UPC: 840151060283
- Part Description: 2008 GMC Yukon Fuel Injection Throttle Body
Vehicle Fitment- 2008 GMC Yukon | SLE | 8 Cyl 4.8L
- 2008 GMC Yukon | Base | 8 Cyl 5.3L
- 2008 GMC Yukon | SLE | 8 Cyl 5.3L
- 2008 GMC Yukon | SLT | 8 Cyl 5.3L
- 2008 GMC Yukon | Denali | 8 Cyl 6.2L
- 2008 GMC Yukon | Hybrid | 8 Cyl 6.0L
$123.61
FAQ for Throttle Body Repair
Q: How do you install the Throttle Body Assembly?
A:
You can install a NEW throttle body gasket to the intake manifold, align the tab of the gasket with the notch in the manifold, install the throttle body, bolts, and nuts, connect the engine wiring harness electrical connector to the electronic throttle control, install the air cleaner outlet duct, connect a scan tool, operate the accelerator pedal, monitor the throttle angles, start the engine and inspect for coolant leaks.
By Bob
GM Specialist
02/11/2022Q: What is the reset procedure for the throttle body with the scan tool?
A:
You can turn the ignition ON and the engine OFF with a scan tool, perform the Idle Learn Reset in Module Setup, start the engine, monitor the TB Idle Airflow Compensation parameter, clear the DTCs and return to the diagnostic that referred you here.
By Bob
GM Specialist
02/11/2022Q: What is the learn procedure for the throttle body without a scan tool?
A:
You can start and idle the engine in PARK for 3 minutes, monitor desired and actual RPM with a scan tool, turn the ignition OFF for 60 seconds, start and idle the engine in PARK for 3 minutes, clear DTCs and return to the diagnostic that referred you here once the engine speed has returned to normal.
By Bob
GM Specialist
02/11/2022Q: How do you clean the Throttle Body?
A:
You can remove the air cleaner outlet duct, inspect the throttle body bore and the throttle plate for deposits, open the throttle plate to inspect all surfaces, clean the throttle body bore and the throttle plate using a clean shop towel with GM Top Engine Cleaner, P/N 1052626, or AC-Delco Carburetor Tune-Up Conditioner, P/N X66-P, or an equivalent product and install the air cleaner outlet duct.
By Bob
GM Specialist
02/11/2022Q: How do you remove the Throttle Body Assembly?
A:
You can remove the air cleaner outlet duct, disconnect the engine wiring harness electrical connector from the electronic throttle control, remove the throttle body nuts and bolts, remove the throttle body, and remove and discard the throttle body gasket.
By Bob
GM Specialist
02/11/2022Q: What should you do if the IAC valve has been in service?
A:
You should not push or pull on the IAC valve pintle, because the force required to move the pintle may damage the threads on the worm drive. Also, you should not soak the IAC valve in any liquid cleaner or solvent, as damage may result.
By Bob
GM Specialist
01/11/2022See more FAQs (1)