2008 GMC Yukon | Denali, Denali Hybrid, Hybrid, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L ELECTRIC/FLEX, 8 Cyl 6.0 L ELECTRIC/GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
FAQ for Parking Brake Shoe Repair
Q: What's the preliminary procedure for the Parking Brake Shoe Replacement?
A:
You should raise and support the vehicle, remove the brake rotor and disconnect the park brake cable from the actuator.
By Bob
GM Specialist
01/11/2022
Q: What's the recommended torque for the park brake shoe retaining bolt?
A:
The recommended torque is 15 N.m.
By Bob
GM Specialist
01/11/2022
Q: How many bolts does the park brake shoe retaining have?
A:
The park brake shoe retaining has a total of 2 bolts.
By Bob
GM Specialist
01/11/2022
Q: How many clips does the park brake shoe retaining have?
A:
The park brake shoe retaining has a total of 2 clips.
By Bob
GM Specialist
01/11/2022
Q: How many pins does the park brake shoe retaining have?
A:
The park brake shoe retaining has a total of 2 pins.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What's the recommended torque for the EBCM screw?
A:
The recommended torque is 3 Nm.
Q: How do you remove the Rear Wheel Speed Sensor?
A:
You can raise and support the vehicle, disconnect the electrical connector, remove the wheel speed sensor retaining bolt, release the wheel speed sensor wiring harness from the retainers and remove the wheel speed sensor.