< Back ×
My Vehicle Change Vehicle
2008 GMC Yukon
< Back to View All
Trunks & Tailgates
- Department
- Prices
OEM (Genuine) 2008 GMC Yukon Release Switch
PartNumber: 15798062
Product Specifications- Notes: Yukon, Lift Gate Window
- Other Names: Release Switch
- Item Dimensions: 2.3 x 1.5 x 1.1 inches
- Item Weight: 0.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 22863048
- Part Description: 2008 GMC Yukon Release Switch
Vehicle Fitment- 2008 GMC Yukon | Denali, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
$40.04 MSRP:$62.98You Save: $22.94 (37%)
OEM (Genuine) 2008 GMC Yukon Release Switch
PartNumber: 15106857
Product Specifications- Notes: Lift Gate Door
- Other Names: Release Switch
- Item Dimensions: 19.6 x 5.0 x 1.3 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2008 GMC Yukon Release Switch
Vehicle Fitment- 2008 GMC Yukon | Denali, Denali Hybrid, Hybrid, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L ELECTRIC/FLEX, 8 Cyl 6.0 L ELECTRIC/GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
$20.07 MSRP:$30.29You Save: $10.22 (34%)
FAQ for Liftgate Release Switch Repair
Q: How do you replace the Accessory and Liftgate Control modules?
A:
You can remove the body side trim panel, press the retainer to release, disconnect the electrical connector and program the replacement module if a replacement control module is installed.
By Bob
GM Specialist
01/11/2022Q: What is the preliminary procedure for the Liftgate Actuator Switch Replacement?
A:
You should remove the left rear quarter trim panel.
By Bob
GM Specialist
01/11/2022Q: What is the tip when you replace the Liftgate Strut Ball Stud?
A:
The tips are that you should cut the tie strip, replace it after the repair, disconnect the electrical connector, and reprogram the power liftgate actuator switch replacement.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the liftgate release switch screws?
A:
The recommended torque is 2 N.m (18 lb in).
By Bob
GM Specialist
01/11/2022Q: How many screws does the liftgate release switch have?
A:
The liftgate release switch has a total of 4 screws.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the power liftgate switch screw?
A:
The recommended torque is 0.2 N.m (1.7 lb in).
By Bob
GM Specialist
01/11/2022Q: What is the preliminary procedure for the Liftgate Release Switch Replacement?
A:
You should remove the liftgate handle.
By Bob
GM Specialist
01/11/2022See more FAQs (2)