FAQ for Hood Latch Repair
Q: What's the preliminary procedure for the Hood Hinge Replacement?
A:
You can prop and support the hood and remove the hood link upper bolt.
By BobGM Specialist
01/11/2022 Q: What's the recommended torque for the hood link lower bolt?
A:
The recommended torque is 25 Nm.
By BobGM Specialist
01/11/2022 Q: How many screws does the hood latch have?
A:
The hood latch has a total of 4 screws.
By BobGM Specialist
01/11/2022 Q: What's the recommended torque for the hood upper hinge bolt?
A:
The recommended torque is 25 Nm.
By BobGM Specialist
01/11/2022 Q: What's the recommended torque for the hood latch screws?
A:
The recommended torque is 9 Nm.
By BobGM Specialist
01/11/2022 Q: What's the preliminary procedure for the Hood Primary and Secondary Latch Replacement?
A:
You can remove the headlamps and the grille support, and disconnect the hood latch cable.
By BobGM Specialist
01/11/2022 Q: How many retainers does the front hood weatherstrip have?
A:
The front hood weatherstrip has a total of 6 retainers.
By BobGM Specialist
01/11/2022 Q: What should be noticed about the Hood Latch?
A:
You should notice that due to design changes incorporating the addition of a gas-charged assist strut, how the vehicle's hood closes is different from the previous GM full-size utility vehicles, and you should instruct the customers to lower the hood slowly to the secondary latch position (hood lowered to first engagement point), then push down firmly on the front edge of the hood to securely close it. You must only push on the rolled top edge of the hood at the very front, avoid pushing farther back on any flat section of the hood as you may dent the metal.
By BobGM Specialist
01/11/2022 Q: How many bumpers does the hood have?
A:
The hood has a total of 2 bumpers.
By BobGM Specialist
01/11/2022 See more FAQs (4)