FAQ for Door Hinge Repair
Q: What's the recommended torque for the front side door hinge upper bolt?
A:
The recommended torque is 25 Nm.
By BobGM Specialist
01/11/2022 Q: What's the recommended torque for the rear side door hinge upper bolts?
A:
The recommended torque is 25 N.m(18 lb-ft).
By BobGM Specialist
01/11/2022 Q: What's the preliminary procedure for the Rear Side Door Hinge Replacement?
A:
You should disable the supplemental inflatable restraint(SIR) system.
By BobGM Specialist
01/11/2022 Q: What's the preliminary procedure for the Front Side Door Hinge Replacement?
A:
You should disable the supplemental inflatable restraint(SIR) system.
By BobGM Specialist
01/11/2022 Q: What's the tip when you replace the Rear Side Door Hinge?
A:
The tips are that you should check the door for proper alignment, then adjust as necessary and you should remove the temporary keeper pivot bolt and replace it with a longer permanent bolt from the underside of the hinge after installation of the replacement upper hinge.
By BobGM Specialist
01/11/2022 Q: How many bolts does the front side door hinge upper have?
A:
The front side door hinge upper has a total of 3 bolts.
By BobGM Specialist
01/11/2022 Q: How do you remove the Door Striker?
A:
You can remove the lower striker bolt, loosen the upper striker bolt, install the lower striker bolt, tighten the lower striker bolt sufficiently, and remove the upper striker bolt, the spacer, and the striker.
By BobGM Specialist
29/10/2022 Q: How do you adjust the Door Lock Striker?
A:
First, you should make certain that the door is properly aligned within the door opening before proceeding with the striker adjustment. second, you should close the door onto the striker and note if the door drags on the striker causing the door to move upward or downward upon contact with the striker. third, you should use a soft marker, mark around the striker for reference of the original position and loosen the striker. forth, you should move the striker to eliminate drag on the striker and door latch and to achieve the proper door position within the door opening. fifth, you should tighten the striker-to-body bolts.
By BobGM Specialist
29/10/2022 Q: What's the recommended torque for the striker-to-body bolts?
A:
The recommended torque is 27 N.m(20 lb in).
By BobGM Specialist
29/10/2022 Q: What's the recommended torque for the door striker-to-body bolts?
A:
The recommended torque is 27 Nm.
By BobGM Specialist
29/10/2022 See more FAQs (6)