FAQ for Control Arm Repair
Q: What's the recommended torque for the upper control arm bolts?
A:
The recommended torque is 190 Nm.
By BobGM Specialist
29/10/2022 Q: What's the removal procedure for the rear axle upper control arm?
A:
You should raise and support the vehicle at curb height, disconnect the electronic suspension control sensor and remove the upper control arm retaining nut and bolt, the upper control arm retaining nut, and the upper control arm.
By BobGM Specialist
29/10/2022 Q: What's the removal procedure for the rear axle lower control arm?
A:
You should raise and support the vehicle at curb height, and remove the lower control arm retaining nuts, the lower control arm retaining bolt, and the lower control arm.
By BobGM Specialist
29/10/2022 Q: What's the recommended torque for the upper control arm retaining nut?
A:
The recommended torque is 160 Nm.
By BobGM Specialist
29/10/2022 Q: What are the special tools for the lower control arm replacement?
A:
The special tools are the J 43631 Ball Joint Separator and the J 45851 Ball Joint Separator Protector Adapters.
By BobGM Specialist
29/10/2022 Q: What is the required tool for the upper control arm replacement?
A:
The required tool is the J-42188-B Ball Joint Separator.
By BobGM Specialist
29/10/2022 Q: What's the installation procedure for the rear axle lower control arm?
A:
You should install the lower control arm, install the lower control arm retaining bolts, install the lower control arm retaining nut and remove the rear axle support.
By BobGM Specialist
29/10/2022 Q: What's the recommended torque for the lower control arm retaining nuts?
A:
The recommended torque is 175 Nm.
By BobGM Specialist
29/10/2022 Q: What's the recommended torque for the retaining bolts?
A:
The recommended torque is 9 Nm.
By BobGM Specialist
29/10/2022 See more FAQs (4)