< Back ×
My Vehicle Change Vehicle
2008 GMC Yukon
< Back to View All
Timing Belts, Chains, Cams & Related Parts
- Department
- Prices
OEM (Genuine) 2008 GMC Yukon Camshaft
PartNumber: 12625436
Product Specifications- Notes: Tahoe, Yukon, Escalade; 5.3l
- Other Names: Camshaft
- Item Dimensions: 3.4 x 3.3 x 28.1 inches
- Item Weight: 14.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12593207
- Part Description: 2008 GMC Yukon Camshaft
Vehicle Fitment- 2008 GMC Yukon | SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
$303.49 MSRP:$502.32You Save: $198.83 (40%)OEM (Genuine) 2008 GMC Yukon Camshaft
PartNumber: 12612273
Product Specifications- Notes: Tahoe, Yukon, Escalade; 6.2l; All
- Other Names: Camshaft
- Item Dimensions: 3.4 x 3.4 x 28.3 inches
- Item Weight: 10.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12583227
- Part Description: 2008 GMC Yukon Camshaft
Vehicle Fitment- 2008 GMC Yukon | Denali | 8 Cyl 6.2 L GAS
$424.62 MSRP:$702.80You Save: $278.18 (40%)OEM (Genuine) 2008 GMC Yukon Camshaft
PartNumber: 12689035
Product Specifications- Notes: Tahoe, Yukon, Escalade; 4.8l
- Other Names: Camshaft
- Item Dimensions: 3.4 x 3.4 x 28.3 inches
- Item Weight: 14.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12593205, 12625437
- Part Description: 2008 GMC Yukon Camshaft
Vehicle Fitment- 2008 GMC Yukon | SLE | 8 Cyl 4.8 L GAS
$198.66 MSRP:$328.81You Save: $130.15 (40%)OEM (Genuine) 2008 GMC Yukon Camshaft Asm
PartNumber: 12629698
Product Specifications- Notes: Tahoe, Yukon, Escalade
- Other Names: Camshaft
- Item Dimensions: 27.8 x 3.3 x 3.3 inches
- Item Weight: 14.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12612275
- Part Description: 2008 GMC Yukon Camshaft Asm
Vehicle Fitment- 2008 GMC Yukon | Denali Hybrid, Hybrid | 8 Cyl 6.0 L ELECTRIC/FLEX, 8 Cyl 6.0 L ELECTRIC/GAS
$113.98 MSRP:$198.39You Save: $84.41 (43%)
FAQ for Camshaft Repair
Q: What's the recommended torque for the CMP actuator solenoid valve?
A:
The recommended torque is 65 Nm.
By Bob
GM Specialist
29/10/2022Q: What should you do when you remove the starter motor?
A:
You should ensure that the teeth of the J 42386-A mesh with the teeth of the engine flywheel.
By Bob
GM Specialist
29/10/2022Q: What's the removal procedure for the camshaft position actuator magnet?
A:
You should remove the water pump, disconnect the engine harness electrical connector from the camshaft position (CMP) actuator magnet, remove the CMP actuator magnet bolts and magnet, and remove and discard the CMP actuator magnet gasket.
By Bob
GM Specialist
29/10/2022Q: What's the removal procedure for the camshaft position actuator solenoid valve?
A:
You should remove the camshaft position (CMP) actuator magnet and remove and discard the CMP actuator solenoid valve.
By Bob
GM Specialist
29/10/2022Q: What's the recommended torque for the CMP actuator magnet belts?
A:
The recommended torque is 12 Nm.
By Bob
GM Specialist
29/10/2022Q: What is the required tool for the camshaft position actuator solenoid valve replacement?
A:
The required tool is the J 45059 Angle Meter.
By Bob
GM Specialist
29/10/2022Q: What should you do during the removal or installation procedure for the camshaft position actuator?
A:
You should not push or pull on the reluctor wheel of the camshaft position (CMP) actuator, because this may dislodge the wheel from the front of the actuator.
By Bob
GM Specialist
29/10/2022Q: What are the required tools for the camshaft position actuator?
A:
The required tools are the EN 46330 Timing Belt Tensioner Retaining Pin, the J 42386-A Flywheel Holding Tool, and the J 45059 Angle Meter.
By Bob
GM Specialist
29/10/2022See more FAQs (3)