Part Description: 2008 GMC Yukon Control Asm-Automatic Transmission
More Info
Vehicle Fitment
2008 GMC Yukon | Denali, Denali Hybrid, Hybrid, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L ELECTRIC/FLEX, 8 Cyl 6.0 L ELECTRIC/GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
$110.43MSRP: $166.58
You Save: $56.15 (34%)
FAQ for Automatic Transmission Shift Levers Repair
Q: How do you remove the Shift Lever?
A:
You can remove the steering column shroud, roll back the shift lever seal on the shift lever until the shift lever bolt is exposed, disconnect any electrical connectors as needed, remove the shift lever bolt and remove the shift lever.
By Bob
GM Specialist
01/11/2022
Q: How do you install the Shift Lever?
A:
You can install the shift lever, install the shift lever bolt, connect all electrical connectors, position the shift lever seal and install the steering column shroud.
By Bob
GM Specialist
01/11/2022
Q: What is the recommended torque for the shift lever bolt?
A:
The recommended torque is 20N.m(15 lb-ft).
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: How many bolts does the transmission mount have?
Q: How do you replace the transfer case shift control module?
A:
You should remove the control valve body assembly, inspect the 4filter plate retaining tabs, align the control solenoid valve assembly with the lower valve body locator pin when assembling, and reset the transmission adaptive pressure(TAP) values.
Q: What's the recommended torque for the right shock rear mounting bolt?