< Back ×
My Vehicle Change Vehicle
2008 Ford Focus
< Back to View All
Brake Drums & Brake Shoes
- Department
- Series
- Brands
- Prices
OEM (Genuine) 2008 Ford Focus Hub & Drum
PartNumber: 2U2Z-1V126-D
Product Specifications- Location: Driver Side; Passenger Side
- Other Names: Drum
- Item Dimensions: 4.6 x 11.1 x 10.7 inches
- Item Weight: 16.20 Pounds
- Replaces: 2U2Z-1V126-AB, BRD-39
- Part Description: 2008 Ford Focus Hub & Drum
Vehicle Fitment- 2008 Ford Focus | LX, S, SE, SES, Sony Limited Edition, ST, SVT, ZTS, ZTW, ZX3, ZX4, ZX4 ST, ZX5, ZXW | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
$65.98 MSRP:$99.98You Save: $34.00 (35%)
Centric® Premium Rear Brake Drum for 2008 Ford Focus
PartNumber: 122.61043Product Specifications- UPC: 805890032731
- Part Description: 2008 Ford Focus Premium Rear Brake Drum
Vehicle Fitment- 2008 Ford Focus | All Trims | All Engines
$73.83
Wagner® Rear Brake Drum for 2008 Ford Focus
PartNumber: BD180206EProduct Specifications- Notes: Bearing;Black E-Coat on non-braking surface to prevent rust and corrosion;with 8in x 1-15/32in Brakes
- Bolt Circle Diameter: 107.95mm (4.25")
- Bolt Hole Quantity: 4
- Drum Type: Directional
- Finish: With E-Shield™ Coating
- Height: 81mm (3.189")
- Material: Cast Iron
- Maximum Diameter: 203.2mm (8")
- Nominal Diameter: 203.2mm (8")
- Rust Resistant Coating: Yes
- Shoe Width: 37.34mm (1.47")
- Slotted: No
- Type: Plain Cooling Fins
- UPC: 008536957089
- Part Description: 2008 Ford Focus Rear Brake Drum
Vehicle Fitment- 2008 Ford Focus | All Trims | All Engines
$98.10
DuraGo® Rear Brake Drum for 2008 Ford Focus
PartNumber: BD80112Product Specifications- Notes: w/Wheel Bearing; CAUTION: Always install a new wheel hub retaining nut after loosening or when nut is not tightened to specifications. Torque to 173 ft-lbs (235 Nm) while rotating. When tightening the new wheel hub nut, rotate the brake drum counterclockwise until the correct torque is achieved or damage to the wheel bearing may occur. A new dust cap & dust shield must be installed or damage to the wheel bearing may occur.
- Abs Sensor Ring Includes: No
- Bolt Circle Diameter: 107.95mm (4.25")
- Bolt Hole Diameter: 12.4mm (0.49")
- Bolt Hole Quantity: 4
- Brake Surface Width: 44.5mm (1.75")
- Construction: Full Cast
- Drum Type: Drum, Hub and Bearing
- Height: 80.8mm (3.18")
- Maximum Diameter: 204.3mm (8.04")
- Nominal Diameter: 203mm (7.99")
- Outside Diameter: 243mm (9.57")
- Type: Plain Cooling Fins
- UPC: 756632153095
- Part Description: 2008 Ford Focus Rear Brake Drum
Vehicle Fitment- 2008 Ford Focus | All Trims | All Engines
$50.45
DuraGo® Rear Brake Drum for 2008 Ford Focus
PartNumber: BD80090Product Specifications- Notes: w/o Wheel Bearing; CAUTION: Always install a new wheel hub retaining nut after loosening or when nut is not tightened to specifications. Torque to 173 ft-lbs (235 Nm) while rotating. When tightening the new wheel hub nut, rotate the brake drum counterclockwise until the correct torque is achieved or damage to the wheel bearing may occur. A new dust cap & dust shield must be installed or damage to the wheel bearing may occur.
- Abs Sensor Ring Includes: No
- Bolt Circle Diameter: 107.95mm (4.25")
- Bolt Hole Diameter: 12.4mm (0.49")
- Bolt Hole Quantity: 4
- Brake Surface Width: 44.5mm (1.75")
- Center Hole Diameter: 63.5mm (2.5")
- Construction: Full Cast
- Drum Type: Drum, Hub and Bearing
- Height: 80.8mm (3.18")
- Maximum Diameter: 204.3mm (8.04")
- Nominal Diameter: 203mm (7.99")
- Outside Diameter: 243mm (9.57")
- Type: Plain Cooling Fins
- UPC: 756632122466
- Part Description: 2008 Ford Focus Rear Brake Drum
Vehicle Fitment- 2008 Ford Focus | All Trims | All Engines
$34.22