Notes: W/Short Wheel Base, All, Ebony; Trailblazer
Location: Driver Side; Passenger Side
Other Names: Window Switch
Item Dimensions: 4.3 x 3.2 x 2.8 inches
Item Weight: 0.50 Pounds
Fitment Type: Direct Replacement
Replaces: 25867017
Part Description: 2008 Chevrolet Trailblazer Switch Asm-Rear Side Door Window *Ebony
More Info
Vehicle Fitment
2008 Chevrolet Trailblazer | Base, LT, SS | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
FAQ for Window Switch Repair
Q: How to install the Rear Side Door Window Switch?
A:
First, you should install the switch to the bezel and connect the electrical connector to the window switch. Next, you should install the window switch bezel to the door trim panel and ensure that the window switch bezel retaining clips are fully seated.
By Bob
GM Specialist
01/11/2022
Q: How to remove the Door Lock and Side Window Switch-Passenger Side?
A:
You should release the front retaining clip and disconnect the electrical connectors. In addition, you should remove the module and the switch panel assembly.
By Bob
GM Specialist
01/11/2022
Q: How to remove the Rear Side Door Window Switch?
A:
You should remove the window switch bezel, disconnect the electrical connector, and release the retaining clips that attach the power window switch to the bezel. Next, you should remove the switch from the bezel.
By Bob
GM Specialist
01/11/2022
Q: How to install the Door Lock and Side Window Switch-Driver Side?
A:
First, you should install the driver door module on the door trim panel. In addition, you should connect the electrical connector to the driver door module. Next, you should program the driver door module and install the switch panel to the door trim panel.
By Bob
GM Specialist
01/11/2022
Q: How to remove the Door Lock and Side Window Switch-Driver Side?
A:
You should release the front retaining clip and disconnect the electrical connectors. In addition, you should remove the module and the switch panel assembly.
By Bob
GM Specialist
01/11/2022
Q: How to remove the Quarter Window Switch?
A:
You should remove the overhead console, disconnect the electrical connector, release the tabs retaining the quarter window switch to the overhead console, and remove the quarter window switch.
By Bob
GM Specialist
01/11/2022
Q: How to install the Quarter Window Switch?
A:
You should connect the electrical connector to the quarter window switch. In addition, you should install the quarter window switch and the overhead console.
By Bob
GM Specialist
01/11/2022
Q: How to install the Door Lock and Side Window Switch-Passenger Side?
A:
First, you should install the passenger door module to the door trim panel. In addition, you should connect the electrical connector to the passenger door module. Next, you should program the passenger door module and install the switch panel to the door trim panel.
By Bob
GM Specialist
01/11/2022
See more FAQs (3)
FAQ for Other Repair Info
Q: How to remove the Spare Wheel Hoist?
A:
You should remove the spare tire, the spare wheel hoist assembly mounting bolts, and the spare wheel hoist assembly.
Q: How to remove the Washer Solvent Container Level Sensor?
A:
First, you should remove the washer solvent container and pry the level sensor switch from the container. Next, the level sensor switch grommet should be removed and discarded.
Q: How to install the Rear Window Wiper and Washer Switch?
A:
First, you should position the switch to the trim plate and connect the electrical connector to the wiper washer switch. Next, you should install the switch and the I/P accessory trim plate.