Part Description: 2008 Chevrolet Trailblazer Ignition Coil
More Info
Vehicle Fitment
2008 Chevrolet Trailblazer | All Trims | 8 Cyl 5.3L
2008 Chevrolet Trailblazer | All Trims | 8 Cyl 6.0L
FAQ for Ignition Coil Repair
Q: How to install the Ignition Coil?
A:
You should install the ignition coil. In addition, you should connect the ignition coil electrical connector and the spark plug wire.
By Bob
GM Specialist
01/11/2022
Q: What is the recommended torque for the ignition coil bolts?
A:
The recommended torque is 8 N.m (71 lb in).
By Bob
GM Specialist
01/11/2022
Q: How to remove the Ignition Coil?
A:
First, you should remove the spark plug wire and disconnect the ignition coil electrical connector. Next, the ignition coil should be removed.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: How to remove the Knock Sensor (Left Side)?
A:
First, you should disconnect the electrical connector of the Knock Sensor. Next, you should remove the mounting bolt and the knock sensor.
Q: What is the recommended torque for the ECM/TCM bracket bolts?
A:
The recommended torque is 10 N.m (89 LB IN).
Q: How to remove the Ignition Lock Cylinder?
A:
You should disconnect the negative battery cable, disable the SIR system, remove the steering column trim covers, and then slide the lock cylinder out of the lock cylinder housing.