FAQ for Hvac Control Module Repair
Q: How to install the HVAC Control Module?
A:
You should connect the electrical connectors and install the following parts: the HVAC control module, the HVAC control module screws, and the I/P accessory trim plate.
By BobGM Specialist
01/11/2022 Q: What is the recommended torque for the blower motor control processor mounting screws?
A:
The recommended torque is 1.9 N.m (17 LB-FT).
By BobGM Specialist
01/11/2022 Q: How to remove the Auxiliary Heater and Air Conditioning Control Module?
A:
You should pry out the top of the auxiliary HVAC control, disconnect the electrical connector, and remove the auxiliary HVAC control from the vehicle.
By BobGM Specialist
01/11/2022 Q: How to remove the HVAC Control Module?
A:
You should remove the I/P accessory trim plate and the HVAC control module screws. Next, you should depress the HVAC control module tabs and remove the HVAC control module. Finally, you should disconnect the electrical connectors.
By BobGM Specialist
01/11/2022 Q: How to install the Auxiliary Heater and Air Conditioning Control Module?
A:
You should connect the rear HVAC control-auxiliary electrical connector and install the HVAC control-auxiliary.
By BobGM Specialist
01/11/2022 Q: How to install the Blower Motor Control Processor?
A:
You should install the blower motor control processor and the right closeout panel. In addition, you should connect the electrical connector.
By BobGM Specialist
01/11/2022 Q: How to remove the Blower Motor Control Processor?
A:
First, you should disconnect the electrical connector. Next, you should remove the right closeout panel and the blower motor control processor.
By BobGM Specialist
01/11/2022 See more FAQs (2)