Part Description: 2008 Chevrolet Trailblazer AC Belt
More Info
Vehicle Fitment
2008 Chevrolet Trailblazer | Base, LS, LT, SS | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
FAQ for Drive Belt Repair
Q: How to remove the Drive Belt - Accessory?
A:
First, you should remove the air cleaner resonator outlet duct and install a breaker bar with a hex-head socket to drive belt tensioner bolt. Next, you should remove the bolt, the breaker bar, and the belt. Finally, you should clean and inspect the belt surfaces of all the pulleys.
By Bob
GM Specialist
29/10/2022
Q: How to install the Air Conditioning Compressor Belt?
A:
First, you should install the A/C belt and the ratchet into the square opening of the A/C drive belt tensioner. In addition, you should remove the ratchet from the A/C belt tensioner and inspect the A/C belt for proper installation and alignment. Finally, the accessory drive belt should also be installed.
By Bob
GM Specialist
29/10/2022
Q: How to remove the Air Conditioning Compressor Belt?
A:
You should remove the accessory drive belt, the A/C belt, and the ratchet. In addition, you should install a ratchet. Next, you should clean and inspect the belt surfaces of all the pulleys.
By Bob
GM Specialist
29/10/2022
Q: How to install the Drive Belt - Accessory?
A:
First, you should install the breaker bar and relieve the tension on the belt. Next, you should install the drive belt, remove the breaker bar, and inspect the drive belt for proper installation and alignment. Finally, the air cleaner resonator outlet duct should be installed.
By Bob
GM Specialist
29/10/2022
Q: What should be noted when servicing the drive belt?
A:
You should be careful not to use belt dressing on the drive belt.
By Bob
GM Specialist
29/10/2022
FAQ for Other Repair Info
Q: How to install the Drive Belt Idler Pulley?
A:
You should install the drive belt Idler Pulley as well as the drive belt.
Q: How to remove the Drive Belt Tensioner - Accessory?
A:
You should remove the accessory drive belt as well as the drive Belt Tensioner.
Q: How to remove the Camshaft?
A:
You should remove the condenser, the valve lifters, the Camshaft sensor, the camshaft sprocket, and the camshaft. Next, you should clean and inspect the camshaft and bearings.